G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   B1bomber Posted on Monday, March 07, 2011 - 02:15 am:        Would it be possible to install the additional parts needed to make a "pre" 2010 XB , from a DDFI1/2 , to a DDFI3 with the dual O2 sensors ? What would you need to do it , a complete wiring harness ? I would think it would be quite expensive , I was just wondering if its even possible . Crazy ?   Firebolt020283 Posted on Monday, March 07, 2011 - 02:17 am:        it may work on a 08-09 but it would take a bit more for it to work on a pre 08 because there is a lot more differences on the older engines.   Froggy Posted on Monday, March 07, 2011 - 02:26 am:        DDFI3 bikes, it should be just a matter of adding a second O2 to the front pipe and wiring it to the ECM, then setting it up in the ECM. The programming is already there, it is just a matter of turning it on. I don't think this is doable on the DDFI1/2 bikes.   B1bomber Posted on Monday, March 07, 2011 - 03:23 am:        Thanks Froggy , that pretty much answered my question.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: