| Author |
Message |
    
Slaughter
| | Posted on Tuesday, March 01, 2011 - 12:42 am: | 
|
Also think OEM are just fine.
If you want bling - get a jewel bonded to your tooth. |
Andymnelson
| | Posted on Tuesday, March 01, 2011 - 05:59 am: |
|
It has NOTHING to do with bling, and OEM may be "just fine", but "just fine" is not good enough for some of us. For some, a lever with a more comfortable fit and, more importantly, proper adjustability is worth the investment. If Buell had simply installed an adjustable clutch lever and a decently adjustable brake lever it would be fine. Calling them bling makes about as much sense as calling a Beson exhaust bling just because it looks good. |
Terrys1980
| | Posted on Tuesday, March 01, 2011 - 08:43 pm: |
|
Very well put Andy! |
Froggy
| | Posted on Tuesday, March 01, 2011 - 08:51 pm: |
|
The stock clutch lever on the good Buells is adjustable.  |
Jramsey
| | Posted on Tuesday, March 01, 2011 - 09:02 pm: |
|
"a lever with a more comfortable fit and, more importantly, proper adjustability.
I adjust my oem levers in my arbor press.
One tweak is all it takes, I'd rather spend/waste the difference on beer and cigs. |
Andymnelson
| | Posted on Tuesday, March 01, 2011 - 09:29 pm: |
|
To each his own. I don't smoke or drink, my Buells are my only vice. |
Steve_mackay
| | Posted on Thursday, March 03, 2011 - 06:07 pm: |
|
quote:The stock clutch lever on the good Buells is adjustable
After I saw this, and ran outside to look at my ulybolt, but alas... no adjustable clutch lever....
Froggy, you shouldn't be fibbing.... |
|
