| Author | Message | ||
     Dhays1775 |
Is there anyone running a 1250 kit with stage two heads? i have ecmspy here and i'm fiddling with some fueling maps in my spare time. i'm currently in afghanistan, so i have a lot of time. i plan on rebuilding my 12r with the 1250 kit and stage two heads once i return. what i'm trying to find is what kind of fueling and ignition maps someone would normally run on a 1250. all i've done is add about 4.5-5% on the fueling as a general starting point for the map once i build it. i plan on having it dyno tuned, but i wanna get the fueling close to correct before i spend the time and money. i will be using the factory headers and a drummer muffler. i've been searching the knowledge vault, but i keep coming up empty handed. any help would be greatly appreciated. | ||
| Dhays1775 |
also, as a side note, i want to get my hands on some equal length headers, but my main concern with that is that i want to be able to run the right side air scoop like on American Sport Bike. i'm sure it's a long shot, but i figured i would throw that out there. | ||
| Rageonthedl |
It should not be that big of a problem I installed NRHS Stage 3 heads on my 12 the afr basicly went in a flat line was easy to add fuel.  | ||
| Dhays1775 |
was that with a race map? looks pretty good. did you build the motor yourself or did you have it built? | ||
| Rageonthedl |
That was Race Kit and the heads. Thats it, I later installed a Directlink Tuner. | ||
| Dhays1775 |
pretty sweet. i love how smooth the curves are. i hope mine looks similar. i was planning on using the stock cams. already have the race map on the ecm. i planned on dropping the rev limiter by 100 rpms. only because i want to be extra safe. i only hit the limiter once, and i didn't like it. hahaha. i'm hoping for about 105-110 rwhp. but i want to hit around 90+ ft/lb. i love the TORQUE!! | ||
| Rageonthedl |
This is a photoshoped picture. I just had to overlay it to the right spot. The runs are stock, race kit, race kit and heads.  Ah dont worry about the rpms that much. I ran a tuned XB9 ecm to get extra rpm. Just respect the motor. run a shift light as a reminder or somethig. thats what I did. |
