G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Archive through January 31, 2011 » How long you think I can last on this tire?(VIDEO?MAYBE) « Previous Next »

  Thread Last Poster Posts Pages Last Post
Archive through December 31, 2010Hammer7130 12-31-10  10:27 am
         

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Delta_one
Posted on Friday, December 31, 2010 - 01:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Jay
do you have to buy your own tungsten?
I bought a box while I was taking welding classes because I did a TON of aluminum and would gum up my tungsten so often I wanted a spare (yea I also dropped the tip in my puddle every now and again too ) but I would also have 4-5 hours arc on time each day in class.

but they only sell tungsten by the box so I have a couple extra 1/8" 2% thoriated rods in 7" length if you need.

I don't own a welder at home so this just sit in my toolbox.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xoptimizedrsx
Posted on Friday, December 31, 2010 - 05:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Now I read save my spare rear tire... arghhh
Well for a good story and shipping its able to ship to another person trying to make a change.

No free loading.

Jay I tried. But looks like Hammer beat me to the Gun.

ah I have Two welders now. one tri mix one helium based mix large shop bottles,I'll never run out at home.

Anyone needing help on rear end Auto axel driveline info and how to's I know a lot on it.
I'm Dana Spicer, AAM (American Axel~ Gm and Dodge(CHRY)),Arvin merito,and ect Certified in those brands from the Manufacturer. Pto certified in Cheaslea and Muncie, Warn wince certified on all there stuff, and Doosan&Ingersolrand certified on Onboard power solutions Equipment(crzy screw drive cfm air power and ect). So, I have a few bits of info in the cranium.

love that 99 Gm 8.5 rear it has three designs two can inner change one your screwed. The only way to know exactly which one you have it open it and measure the Diff race OD and Bearing ID on the diff. the large ID is only one fit the small ID has two bearings(same Id different OD) that makes it fit in both. same on the seal kits.
one is like a saver style from the factory. if the yoke is worn dont toss it pry off the saver and get the late style seal.(older 8.5 gm) install on truck. it fits 100% then put yoke back on with out saver(oem part). poof fixed at 1/3 cost.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellblastrider
Posted on Friday, December 31, 2010 - 06:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

May have to remember you if my S10 ever kills the rear end.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaylightnin0666
Posted on Wednesday, January 05, 2011 - 09:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

oh yea anyone got a sevice manual that I can download, or atleast the part about changing the rear tire?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaylightnin0666
Posted on Wednesday, January 05, 2011 - 09:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

UPDATE.........---///---

...---... ...---... ...---...

I recieved the tire from HAMMER, thanks again man This helps me soo soo much. Thanks to everyone else for your support and comments. I need to find sumwhere to put this tire on now! I talked to one guy who can do it for 40 bucks, I just gota get the bike and tire there. Im trying to find some1 a little closer, he is like a half hour away in jaxville traffic. Anyways, Thanks again, if anyone has any good ideas lemme know. I dont have alot of tools, but some. I am at a extended stay hotel, so no garage but plenty of space to work on it in the parking lot. The hotel lets people work on there vehicles here too. Thanks again guys, lemme know what ya think
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolteric_ma
Posted on Wednesday, January 05, 2011 - 11:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Rich is "The Man"....
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration