| Author | Message | ||
     Lloydxt |
Ive got new decals and was wondering if anyone knows a good way/trick on how to get the air box decals positioned correctly? Thanks! | ||
| Terrys1980 |
Tape measure, pencil and masking tape | ||
| Iman501 |
when i did mine, i traced the old decals that were on the bike before removing them, so i would know where to put the new ones (i replaced the orange ones with black ones) | ||
| Lloydxt |
Thats the problem, I bought my bike used and it didnt have any decals. Ive looked at pics but dont have a real starting point or measurements. | ||
| River |
Terrys1980 is right man. Except he forgot to add "time'. Take your time. Tape down an edge, walk around it, sip a cold one, find the spot that works. | ||
| 80rs427 |
I have an '07 Firebolt and I'd be glad to try and get some measurements for reference. Drop me a note if you want them. | ||
| Lloydxt |
pm sent. thanks | ||
| 80rs427 |
Here are my sketches of the placement on my '07 Firebolt. I can email a larger image if you need it....  | ||
| Upthemaiden |
I know this thread is old news and he's probably already done this, but just for anyone's future reference I wanted to say be careful with the masking tape. When I replaced my stickers I outlined the old stickers in blue masking tape, and then just lined up the new ones with the tape. When I pulled the tape off it actually ripped little strips out of the top layer of plastic in the airbox. Not the worst thing in the world, but if I ever do it again I'll be sure to use electrical tape, or just stick the masking tape to the couch a few times or something to make it a little less sticky before it goes on the airbox. | ||
| Tick |
painters tape it is blue and comes in different sizes 1in wide roll 2in w 3in w and different adhesion to |
