G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Archive through December 02, 2010 » FAILED COM POS @#!%!$#^! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Wednesday, November 24, 2010 - 08:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i havent the chance to connect my bike to ecmspy.

I have a copy from ecmspy, and plan to help myself and a person out with mild tuning and tps.

I have made the cable and it connect to the computer, but is unreconized .. "unknown device"

i would think this is not a problem because maybe the buell's ecu does not send out a name.

But I cannot connect my bike to the computer.

I've updated my dell usb drivers, and was told to get a different driver from a site (that i forgot the name of) Ftdichip.com...?

there were two options for drivers, they could not work, its a bit of a headache, im stuck!!!!

is there a checklist for me?

im continuing from this thread
http://www.badweatherbikers.com/buell/messages/327 77/595512.html

Xopti could you elaborate your last two posts on that thread? or remote assist?

(Message edited by ochoa0042 on November 24, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Wednesday, November 24, 2010 - 09:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

not reconized



driver details



trying to update, and it says that could not find a better match




the driver download isnt straight forward to which one i should pick... direction?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Wednesday, November 24, 2010 - 09:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

do i not have the right program for my ECM?

i was reading that they have variations per ECM model year....

but my computer is 'seeing' the connection but not making one
Top of pagePrevious messageNext messageBottom of page Link to this message

Xoptimizedrsx
Posted on Wednesday, November 24, 2010 - 10:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

your computer see's your cable correct?

you have a listed comport in the device manager?

select that com as the cable com.

now what version of ecmspy do you have?

If its the ecmspy mono and from the free download thats not going to link at all...

there is many many rs232 devices on the market you can use. each has its own driver.
what brand do you have?

what brand of cable if ready made?

I use Prolific and FDTI only for reliability. Both have their own drivers.

if you need direct assistance in the link. you will need teamviewer.com viewer. (free non commercial version) I can help you set it up then.

rules
year bike 2008 up Tunerpro or ecmspy mono
2007 down tunerpro or Ecmspy Pc version.

basics
neutral, key on,run on... set com port.
ecmspy uses one way tunerpro uses the other. once set and working once it retains the settings.

pm me for help and online live assistance to link the bike.


Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Wednesday, November 24, 2010 - 11:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

your computer see's your cable correct?
yes
you have a listed comport in the device manager?
yes
select that com as the cable com.
how, do i designate this?
now what version of ecmspy do you have?
V1.12.1
If its the ecmspy mono and from the free download thats not going to link at all...
i hope it was a good copy : )
there is many many rs232 devices on the market you can use. each has its own driver.
what brand do you have?

home made, my thread posted ^^ has the details.
what brand of cable if ready made?

I use Prolific and FDTI only for reliability. Both have their own drivers.

if you need direct assistance in the link. you will need teamviewer.com viewer. (free non commercial version) I can help you set it up then.

rules
year bike 2008 up Tunerpro or ecmspy mono
2007 down tunerpro or Ecmspy Pc version.

basics
neutral, key on,run on... set com port.
ecmspy uses one way tunerpro uses the other. once set and working once it retains the settings.

pm me for help and online live assistance to link the bike.

ok

Mike

(Message edited by ochoa0042 on November 24, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Xoptimizedrsx
Posted on Thursday, November 25, 2010 - 12:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

got pm replied.
now we coordinated the time.
mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Jake318
Posted on Thursday, November 25, 2010 - 08:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Xoptimize ... I found my extra Factory Adjustable ECU !! if mine goes shot Ill need the extra one back , but if not you can use it for your/paints bike. take it easy jake


PS sorry i didnt get to send 30/585 redshift cams yesterday . I will try again on friday ( buying new bike on friay
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Friday, November 26, 2010 - 08:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

does anyone have a Race map for a 12 available?
Top of pagePrevious messageNext messageBottom of page Link to this message

Xoptimizedrsx
Posted on Saturday, November 27, 2010 - 11:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Jake!!!!
your going to make me pee my pants.

well Laird is gong to pee his pants.

Once I get the bike back together and street inspected it comes back apart. ( just body work, lights,and front assy.)

after that it goes back to race spects.

I needed to get it set to street use for title purposes in fl cause they will not put it into my name unless it passes inspection even though it was built be hand from scratch parts.

always something. After that If i had to sell it I could with title. It could be sold as a street bike or race bike then.

But its not getting sold. lol

Thats my wife diversion.lol


Laird will go fast now...
pic of the bike...


Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Tuesday, November 30, 2010 - 11:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

bump
does anyone have a Jardine or race map for a 12?
i need the map for a friend, all im using ecmspy for is to get my tps, but a friend needs a map for his jardine, much appreciated

opti - PM sent

(Message edited by ochoa0042 on November 30, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Thursday, December 02, 2010 - 12:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

thanks for the help opti, so all i needed was a chip.. rs232 like you said before? (retorical) hmm well alrighty then, im stuck with school and finals. so i will just be criusing along for now

bump for..
does the jardine map or race map that i can have so i can help out a friend?
or atleast the functions and grid-picture so i can imput the values myself????
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration