|Posted on Wednesday, August 25, 2010 - 10:03 pm: ||
yep its here and working...
get tunerpro rt v5 7.00
get the buell plugin
set the ports and buell file
hook up the cable
load your xdf and thats all you need.
a all in one program for full details.
rear/write, save. retune
next the adx files can further get developed into fancy stuff as well.
I'm about done with the ecm's at this point I have no further interest to go any further developing the adx. if current files dont match your ecm just edit the values in the history table area to match your values. you can even add more features if you like. Mark has some excellent help files on this area to further develop the files.
I promissed a working setup I delivered.
Ill make another small video on setting the new program up and using it. From there you should be good for all your needs.
|Posted on Monday, August 30, 2010 - 07:46 pm: ||
Thank you for all your hard work. It is very much appreciated.
|Posted on Sunday, September 19, 2010 - 06:05 pm: ||
new version update available on website. also new plug-in is available as well. same functions just faster and a safety burn box was added on the read/write plug-in.
|Posted on Wednesday, September 22, 2010 - 01:51 pm: ||
always check in at tunerpro for new updates on your files please. make that habit...
also for the Ducati guys the tunerpro will do your ecms. you need to get the same cable the buell uses and wire it to your style plug.
the full detail i dont know yet but I do know some ecms are reading now. I found a generic xdf online. we are going to get a few different ecms to use to learn from and add more data. it takes time to do. but it will come.