G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dfishman Posted on Saturday, July 17, 2010 - 12:48 pm:        Does the machined part that the hardware attaches go to the out side of the wheel or the inside.I feel like it goes to the outside but want to make sure. Thanks   Nik Posted on Saturday, July 17, 2010 - 01:03 pm:        Machined side goes inside, up against the bosses on the rim.   Dfishman Posted on Saturday, July 17, 2010 - 01:10 pm:        Thanks.Now back out in the heat to put it back together.   Dfishman Posted on Saturday, July 17, 2010 - 02:12 pm:        Just got it together & came in the house.Got an E-mail from Erik Buell Racing tech & they said machined surface out........Now back in the heat to change it.   Nik Posted on Saturday, July 17, 2010 - 03:10 pm:        Then it works just fine backwards or I didn't understand the way you phrased it.   Dfishman Posted on Saturday, July 17, 2010 - 04:21 pm:        No big deal.I think it took me 15 minutes to switch it back.Now I'm fast on the front wheel remove/replace.   Ourdee Posted on Saturday, July 17, 2010 - 05:40 pm:        If it is hot outside, I bring the wheel inside. Guess I'm just old enough to get away with it. Of course my wife knew I welded in the kitchen in the winter before we got married. She doesn't let me do that anymore though.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: