| Author | Message | ||
     420at145mph |
how do u remove the tank decals without scratching the •••• outta the cover? i wanna take off the american made n the front reflectors | ||
| Wyckedflesh |
Let it sit in the sun and get all nice and warm, take your fingernail and work it under a corner and lift. USe either Goo Gone or WD-40 to get the stick-um off after you pull the decals off. | ||
| 420at145mph |
workd like a charm all 4 came right off wonder if that american motorcycles sticker will stay stuck to the back of my brain bucket | ||
| Wyckedflesh |
3M auto trim adhesive works wonders  | ||
| 420at145mph |
meh it dont really match anyway | ||
| Al_lighton |
The just peeling it off works great on any of the bikes molded from Surlyn. But do that on a painted S3 tank and you may wish you hadn't. You can separate the paint from the primer if you lift/peel. Yea, I know, this is the XB board.... Best to observe the park in sun part, and then get some dental floss and "saw" it off for painted bikes. The googone/WD40 is a fine suggestion too. |
