G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Marksm Posted on Wednesday, June 16, 2010 - 11:47 pm:        I put my wheel back on tonight and tightened down the axle before my brain registered this line in the manual, "Never tighten rear axle with swingarm brace removed" It was torqued down about 5 minutes before I broke it loose again and installed the swingarm brace. Then re torqued it. Did I hurt anything?   Rah7777777 Posted on Wednesday, June 16, 2010 - 11:52 pm:        i highly doubt you hurt anything at all.   Gunut75 Posted on Thursday, June 17, 2010 - 05:30 am:        Nope, your good! I did the same thing. It's done so you can put the fasteners that hold the brace in place in without any probs. No worries. Put it together and RIDE!!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: