G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Wrapping the headers « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Sunday, June 06, 2010 - 08:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey guys, just wanted to see what the easiest way is to wrap the headers on my 12r would be. i know i'm probably gonna have to take off the head pipes so i can get to them better. i've also got an ecm spy cable on the way. i found out that my bike has the stock ecm, and is running with a drummer pipe. i'm fairly certain that is the reason for the low rpm stuttering. any input would be greatly appreciated. thanks guys!
Top of pagePrevious messageNext messageBottom of page Link to this message

Paint_shaker
Posted on Sunday, June 06, 2010 - 08:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

U can wrap the headers on the bike. Wet the wrap first as it reduces the fiberglass dust. When finished, start the motor to cure the wrap. When dry, use aluminum foil to cover the engine, a drop cloth on the rest of the bike and paint it with header wrap paint.

The drummer can was designed to work with the stock settings, but can be tuned for better performance. I am not a tuner.

Enjoy!
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Sunday, June 06, 2010 - 08:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i got good reluslts with wrapping the pipes with out removing them. the next winter, i removed them to re-wrap, and the results were similar. i wouldn't take them off just to wrap. bit if you've allready got the bike torn apart....
Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Sunday, June 06, 2010 - 08:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

thanks. the bike isn't torn down because it's my daily driver. i don't think it'll be that hard to wrap them still on the bike, just a little hard to get to in a couple spots. but i'll manage. i got the black wrap, gonna put that on then get some black high-temp paint tomorrow. i think i'll be able to make it look pretty good. thank's for the input, you guys are great.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brightbuell
Posted on Sunday, June 06, 2010 - 08:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

post a pic when your done. I love the look of the headers but to each his own. Are you wraping cause of the heat?
Top of pagePrevious messageNext messageBottom of page Link to this message

Im_joedirt
Posted on Sunday, June 06, 2010 - 08:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I just just wrapped mine while still on. Turned out better than expected. I used about 8 metres and got good even coverage. Used S/S fasteners at each end to keep in place.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nightripper
Posted on Sunday, June 06, 2010 - 09:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I ca't see any logical reason for wrapping exhaust pipes, it really does nothing for performance on the street. I could see wrapping your exhaust if you had a banged up or homemade steel pipes as on a homemade chopper. From what I read at other sites alot of buells run on dynos with wrapped headers, it made no additional horse power.

Maybe I'm to old but I would rather look at stainless steel pipes instead of something that looks like ace bandage.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogs
Posted on Sunday, June 06, 2010 - 09:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey Nightripper,
Good to meet another Old Fella , Anywho Just Wrapped mine for the third time ... over the past 6 years...once with header off , other 2 times while on bike.. YuP is good for Cutting the Heat down around the header And Your leg etc.....And I`m not going to get into it with ya on engine performance Benefits...There is some,Guess it depends how hard ya ride on the Street.:-)
Top of pagePrevious messageNext messageBottom of page Link to this message

Im_joedirt
Posted on Sunday, June 06, 2010 - 09:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

@Nightripper, my only reason is that i like that look. Each to their own i suppose.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogs
Posted on Sunday, June 06, 2010 - 09:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Im_joedirt,

Oh Yeah Forgot to mention that Sassy/Rough Look.! Matter of Opinions
as ya say.
Top of pagePrevious messageNext messageBottom of page Link to this message

Im_joedirt
Posted on Sunday, June 06, 2010 - 09:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hogs,

Just like my women lol,All ive heard that its only been an aesthetices thing, does it really affect performance? and how?
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Sunday, June 06, 2010 - 10:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Get the DEI Titanium wrap, no water needed, mine will get rewrapped soon.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Sunday, June 06, 2010 - 10:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

just put the wrap on, and i don't think it turned out half bad for my first attempt. i live the look of the headers, but the previous owner painted them black. i'm gonna paint it later this week when i have a little time.



Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Sunday, June 06, 2010 - 10:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)



Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Monday, June 07, 2010 - 09:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Looks good mang!!!!! It's not as tough as I thought it'd be, did mine saturday night. Did plain colors though because I have full fairing covers it up. Can't wait to get it into traffic and see if it kills the infamous right-side-burn!
Top of pagePrevious messageNext messageBottom of page Link to this message

Brightbuell
Posted on Monday, June 07, 2010 - 01:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Bwell if your to lazy to get some wd 40 and a green pad to srcubb for 20 min then wraping is the way to go. Keep in mind if you get a good right side scoop it will reduce the heat comming off your header.
















Top of pagePrevious messageNext messageBottom of page Link to this message

Brightbuell
Posted on Monday, June 07, 2010 - 01:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Dahays now i understand why you would defile your bike in such a way. That sticker of the harley sheild on your clutch cover says it all. You think your riding a sportster. Anything covering any part of a sportster is good.

Keep in mind Buell people we can talk trash in fun so dont respond with a bunch of harley fag cry baby attitudes. Its all in fun.
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Monday, June 07, 2010 - 02:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is that a MoCo timing cover? Should probably turn that upside down.
Top of pagePrevious messageNext messageBottom of page Link to this message

Phazernut
Posted on Monday, June 07, 2010 - 03:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey Brightbuell, when you say green pad are you talking about those green scotchbright pads. Your headers look great. Was wondering what I needed to do to get mine looking new again.
Top of pagePrevious messageNext messageBottom of page Link to this message

B00stzx3
Posted on Monday, June 07, 2010 - 03:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yeah Phazernut...gonna polish them mofos up. I'll post pics of mine later, thats the last anyone will see of em when fairings go back on : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Monday, June 07, 2010 - 10:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

hey brightbuell, the bike came with the Harley cover on it. and just for the record, if i wanted a sportster, i'd have a sportster... and greg_e, it's riveted. otherwise i would gladly turn it upside down just to make it a little more different. trust me guys, the wrap helped a bunch on the heat. i rode down the 52 to the beach to come back on some twisties and it wasn't near as bad as the last time. all in all, i think it was a good investment.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brightbuell
Posted on Tuesday, June 08, 2010 - 12:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Im just talking smack, do what you gota do to deal with the heat.

Green scotch bright pads and wd 40 is all i use to polish my headers. spray the pad and 1 hour or less you got gleaming headers.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brightbuell
Posted on Tuesday, June 08, 2010 - 12:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Im just talking smack, do what you gota do to deal with the heat.

Green scotch bright pads and wd 40 is all i use to polish my headers. spray the pad and 1 hour or less you got gleaming headers.
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Tuesday, June 08, 2010 - 11:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The rivets can loosen up and the cover will vibrate enlarging the holes. If you are careful when drilling the rivets, you can tap the stock holes for #10-32 screws and then not have to worry about the rivets again.

My stock cover has rather oblong holes in it, but now the screws keep it tight. Need to buy a new one sometime so it looks pretty.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Tuesday, June 08, 2010 - 09:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

thanks greg_e. i'll see what i can do about flipping that cover over for ya. and brightbuell, if i'm ever in your neck of the woods, i'll swing by to teach you how to ride. haha. i might try to brighten the headers when i get back from deployment. all in time...
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Tuesday, June 08, 2010 - 10:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Just be careful drilling them out, I only went 'til the heads fell off. Then pull the other screws out so you have the real cover plate in your hand, then you can tap the holes.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration