G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Archive through May 25, 2010 » Cutting out, fuel problem? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzzit34
Posted on Wednesday, May 19, 2010 - 01:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So today I had my 04 XB12S cut out twice. First time I took off the sprocket cover and found a loose connector. Then, after riding another easy 3 or so miles, it just randomly cut out as if it wasn't getting any fuel. I turned ignition off, and let it prime the fuel twice. Started right up, and rode all the way home. Noticed quite a bit of decel popping and several pops that were more powerful than most. Jardine exhaust problem, or fuel mapping problem? It has almost 18K miles, so maybe something is starting to wear out? Any ideas are welcome, thanks.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Wednesday, May 19, 2010 - 07:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Low Batt will do that
also TPS reset may be needed.
There are no codes?
Top of pagePrevious messageNext messageBottom of page Link to this message

Buffalobolt
Posted on Wednesday, May 19, 2010 - 10:55 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had the same thing happening last week.

I found two items
- Loose positive battery terminal
- Bad/loose plug wire at the coil for the rear cylinder.

Check those. Hope it helps...
Top of pagePrevious messageNext messageBottom of page Link to this message

Afinley
Posted on Wednesday, May 19, 2010 - 10:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Could also just be a fouled plug from all the starting and stopping
Top of pagePrevious messageNext messageBottom of page Link to this message

Fast1075
Posted on Thursday, May 20, 2010 - 05:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had a similar problem with mine...after it quit and wouldn't restart, I found that the wiring harness where it comes around the negative battery terminal had worn thru. This caused the power wire to the ecm to momentarily ground...at first the contact was not long enough in duration to blow the fuse..and resulted in erratic and intermittant misfire...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration