G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Breather hose size check « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Saturday, May 15, 2010 - 01:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I just wanted to ask before going to the store and buying some fuel line. Is the correct size 3/8 for the connection to the PCV valve to eliminate the molded stock hoses?

Is there a specific outside diameter that I should try to hit to close off the airbox? I'm probably going to use the U shaped hose to plug the airbox as opposed to some sort of plug, seems the best way to do this to me.
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Saturday, May 15, 2010 - 01:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

3/8" is the correct size and the standard fuel hose should be big enough to plug the holes. I used sensor friendly black RTV sealant to fill the holes.
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Saturday, May 15, 2010 - 02:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'm probably going to use the U shaped hose to plug the airbox as opposed to some sort of plug, seems the best way to do this to me.
I think what you're saying is what I did.
I used one of the original vent hoses and just made an upside down U, to plug the holes in the air box.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fast1075
Posted on Saturday, May 15, 2010 - 02:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

+ 2 on the upside down "U".
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Saturday, May 15, 2010 - 02:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I am still undecided on plugging the holes. An extra chunk of tubing in the holes is about the most simple way of doing it. I also thought about filling each hole with RTV. Ultimately I won't decide until I actually do it. Need to wait until me catch can arrives before I go buy hose and T or Y connector to make sure it doesn't have a different size connector on it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Saturday, May 15, 2010 - 02:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Need to wait until me catch can arrives
Which one did you get?
Some come with all you need.
Mine did, I got the Drummer kit.
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Saturday, May 15, 2010 - 03:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I bought a generic can because I don't want to spend that much money right now. Not going to be as elegant as the Drummer, but will work and be way cheaper, around $25 with shipping and all I need is the hose and an outlet filter of some sort.
http://www.pegasusautoracing.com/productdetails.as p?RecID=4703

It says it will take 1/4 to 5/16 hose, but I'll probably wait until it gets here next week. It shipped on Friday. Also need to make some sort of saddle mount for it, probably strap it to the V bracket next to the oil cooler.
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Saturday, May 15, 2010 - 04:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is there any advantage to having a catch can? I just have the hose ran down even with the bottom of the chin fairing with a bolt screwed into it. I figured that could hold a few ounces of oil if it didn't leak past the bolt.
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Saturday, May 15, 2010 - 04:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If the end of the hose is sealed (the screw) then the gasses and other goop will never get out of the engine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Saturday, May 15, 2010 - 04:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have a breather filter teed off by the oil cooler. Just curious if the can is really needed. I do pull the bolt out every couple months or so.
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Saturday, May 15, 2010 - 04:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

A lot of people just run a breather, kind of depends how much stuff you expect to come out.
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Saturday, May 15, 2010 - 05:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That's a nice one Greg.
Wow! Damn good price on it too.
If I hadn't got mine from Mike Norris (mine doesn't have the Drummer logo) I'd probably just have a film can and a filter.
He made my timing cover also.
Great guy, too bad he doesn't come round here any longer.
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg_e
Posted on Saturday, May 15, 2010 - 07:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well the design of that other can is nice, especially since it looks like it belongs. The one I bought will always look like an add on that I jammed on the bike.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration