G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Firebolt020283 Posted on Tuesday, May 04, 2010 - 03:45 pm:        Ok so I am going from my m2 to my 03 xb9r and I noticed the xb will not let me start it in gear with the clutch pulled in and my m2 would. Is there a way I can change this on my xb?   Andymnelson Posted on Tuesday, May 04, 2010 - 03:49 pm:        Yes. Put the kickstand up.   Firebolt020283 Posted on Tuesday, May 04, 2010 - 03:50 pm:        still does not work.   Deltablue Posted on Tuesday, May 04, 2010 - 03:55 pm:        Check your clutch switch and make sure it isn't broken.   Greg_e Posted on Tuesday, May 04, 2010 - 04:23 pm:        Check the clutch switch and the side stand switch, pretty sure mine does the same thing until the clutch is in and the stand is up. Also kills the motor if the stand is down and you let the clutch out. Basically I always put it in neutral when I start it. My Suzuki was like this too, same side stand clutch lockouts so it's not much of an issue for me.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: