G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » XBoard » Archive through May 01, 2010 » TunerPro - Check engine light error codes « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tenn10
Posted on Thursday, April 29, 2010 - 12:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Posted in knowledge vault - no takers.
2009 Uly. Check engine light comes on briefly now and then while riding. Flashes error code 34. This indicates a problem with the idle air control system. There are however three different problems associated with this code number.
I have downloaded the eeprom data using EcmRead and loaded it into TunerPro. The XDF file is BUEZD. In the flags/switches section there are error mask byte switches for bytes 0 through 10 excluding byte 9. Byte 6 lists the three IAC errors possible.
The Stored Errors Bytes listed are only Bytes 7, 8 and 10. The other stored error bytes (esp. Byte 6) are nowhere to be seen.
Am I doing something wrong that is preventing this from showing up?
Is the definition file still under development?
Has anyone else experienced this and have any input?
By the way, there is no physical indication of a problem other than the Check Engine light which shuts off after a few minutes down the road. The bike runs great!
Thanks y'all.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration