G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jraice Posted on Monday, November 30, 2009 - 12:26 am:        Number 2? Pitbull says thats the proper pin for XB9/XB12S but makes no mention of the Ss.   Froggy Posted on Monday, November 30, 2009 - 12:58 am:        Same thing.   Al_lighton Posted on Monday, November 30, 2009 - 01:44 am:        A #2 or #3 pin will work, same diameter. A #3 pin has the part that fits up into the steering stem at a slightly different angle than the part that fits in the stand, which helps with fairing clearance on 115Rs and fender clearance on Uly beaks. Al   Jraice Posted on Monday, November 30, 2009 - 10:35 am:        Thanks guys! #2 it is.   Ratbuell Posted on Monday, November 30, 2009 - 11:08 am:        Damn, wish I'd known about the #3 when I ordered my PitBulls years ago, been using the #2...oh well, the only thing flexing the beak on my Uly does is knock all the dirt loose LOL. The same pin should fit my CR though, yes?   Greg_e Posted on Monday, November 30, 2009 - 12:47 pm:        How much are the pins? Why not just buy the other pin (or make it).

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: