G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Kdogshirow Posted on Tuesday, September 29, 2009 - 05:24 pm:        Does ECM Spy have the ability to show the Air Fuel Ratio ? Max & Min. settings ? If it does , I am not looking in the correct page or menu , because I can't find any AFR #s . Or can I only get the AFR reading on a Dyno ? I know its not the same as the AFV #s . Thanks   Swordsman Posted on Wednesday, September 30, 2009 - 10:13 am:        Don't think so, because the bike doesn't monitor A/F. The ECM only reacts to a high or low voltage coming out of the O2 sensor, and adds or subtracts fuel depending on if the readout was above or below its target voltage setting. ECMSpy does show those target values, but there's nothing that spells out what the actual A/F ratio is. ~SM   Kdogshirow Posted on Wednesday, September 30, 2009 - 10:57 am:        Where are those target values located in ECM Spy Swordsman ?   Swordsman Posted on Wednesday, September 30, 2009 - 11:41 am:        Ummmmmm.... dang, I KNEW you were gonna ask that! I can't remember which tab it is, but there will be a small box area on the right hand side with three voltages listed vertically. Seems like the box is actually labeled something about the O2. I think it may be under the "Other Maps" tab. I'm at work right now, or I'd pull it up and see... ~SM   Patagonia_101 Posted on Wednesday, September 30, 2009 - 02:05 pm:          Swordsman Posted on Wednesday, September 30, 2009 - 04:41 pm:        Aha! That's what I'm talkin' about! FYI, you'll need to have ECMSpy set in "Advanced" mode, or "Expert" mode, or whatever they call it, to see that tab. It's in the settings. ~SM   Krueger08xb12s Posted on Thursday, October 01, 2009 - 08:24 am:        so i can't use this awesome software on my 08Xb?? None of it??   Bartimus Posted on Thursday, October 01, 2009 - 08:51 pm:        NOPE! The ECMspy software does not work with the DDFI-3 on the '08 and up models.   Buelltastic Posted on Thursday, October 01, 2009 - 11:13 pm:        If I have the factory race kit, what could I stand to gain by getting ecm spy and learning how to use it?   Scotty_j Posted on Friday, October 02, 2009 - 08:08 am:        Well, with ECM Spy, a laptop, and a cable you can datalog and tune your bike to the gnat's ass, perform your own AFV & TPS resets, check and clear trouble codes, and (if you're not careful) you could brick your ECM. Do LOTS of reading and proceed with caution.   Cthagreekgod Posted on Friday, October 02, 2009 - 09:26 am:        I just got ECM spy myself. The guy who sold me the wire also gave me all of the maps (stock and race maps since2003). If I load the race map onto my stock ECU, will it be exactly the same as the race ECU that I already have? If so, Race ECU for sale! :-)   Kdogshirow Posted on Friday, October 02, 2009 - 08:07 pm:        If someone needs a Ecm DDFI-2 , I have one of my 07 XB9R to sell . This will work with ECM Spy . PM me .

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: