| Author | Message | ||
     Ironheadsporty |
Anyone ever tried adding a Halo kit to their headlamps? I was searching online and found this kit: http://www.automotivelightstore.com/index.asp?Page Action=VIEWPROD&ProdID=45# Has anyone had any luck with this kit? Pictures? Is it really going to look like its a factory install or is it just some terrible looking two sided tape installation? | ||
| Firebolt32 |
Use the search engine. There was a guy who did it with a Bolt. I personality didn't like it. The S may be different? | ||
| Biff |
these halo kits are different than what the guy with the bolt did. Per my understanding, these are actual florescent bulbs that are inserted in the housing. I have never seen them in person, but (if my memory serves me correctly) there are a few guys on the dodge forums that have installed these kits on their rams. They looked pretty good from the pics. I think having 1 ring would be pretty cool (on the h-beam side). | ||
| Delta_one |
the better kits are a flexible rubber tube that is illuminated from a single bulb or led. this is a common addition to import tuners, it is stolen from the BMW stock headlight design for a daytime running light that was not obnoxious or projecting but still visible in traffic and low light conditions. look up angel eyes. (Message edited by delta_one on August 21, 2009) | ||
| Christopher12 |
cool, or you can make it... http://www.geocities.com/jvxdriver/eagle_eyes.htm? 20086 | ||
| Delta_one |
nice find!  |
