G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through August 17, 2009 » Power loss @ 3800rpm. Suggestions? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Krueger08xb12s
Posted on Friday, August 07, 2009 - 08:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have an 08 xb12s with a drummer exhaust k@n airfilter and breather reroute. These mods had no negative impact to the torque curve over the last year up until the last month. The bike has normal power up to 3800 where power dips very bad thru 4200 where i feel a very noticeable jolt of power. Has anyone had this occur out of the blue? Suggestions to correct it? Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Krueger08xb12s
Posted on Monday, August 10, 2009 - 06:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Can anyone help me on this topic? My bike falls on its face thru a few hundred rpm's
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Monday, August 10, 2009 - 07:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

make sure your plugs are not worn in the electrode tips ( not fouled worn )recycle your throttle to reset the tps as per buell ( i don't know how its in your manual) then get a good highway kind of ride in there and check it again if that don't work check fuel pressure sorry thats all I got
Top of pagePrevious messageNext messageBottom of page Link to this message

Blake
Posted on Monday, August 10, 2009 - 10:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Does your Drummer make use of the muffler valve? If so, it or its cable/linkage/actuator may require checking and/or adjustment.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Monday, August 10, 2009 - 01:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the bike would or should code if the valve is sticking or not functioning I would think
Top of pagePrevious messageNext messageBottom of page Link to this message

Xoptimizedrsx
Posted on Monday, August 10, 2009 - 08:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

most drummers and the fuel map are to rich in that spot. remove a little fuel.

this is not all. get a afr test done. it will tell you what to do.

mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Krueger08xb12s
Posted on Wednesday, August 12, 2009 - 08:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Mike, i have an 08, can i complete your suggestions with ecmspy or any other way? To my knowledge, my bike is very hard to marry with ecmspy and almost impossible to work with. True still? Anyone? Thanks, kyle
Top of pagePrevious messageNext messageBottom of page Link to this message

Kds1
Posted on Wednesday, August 12, 2009 - 10:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

sounds like the 02 sensor not working right, had the same problem once, no code but changed the 02 and all better...maybe not your problem but worked in my case...
04 XB 12.....

www.kdfab.com
Kevin
Top of pagePrevious messageNext messageBottom of page Link to this message

Krueger08xb12s
Posted on Wednesday, August 12, 2009 - 11:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Kevin, thanks for the tip and thanks again 4 the drummer! Can my 08 be professionally tuned or altered with a program? The decel popping and developing power loss is driving me nuts! Does the excessive popping mean i'm running lean and hot?
Top of pagePrevious messageNext messageBottom of page Link to this message

Thatman
Posted on Wednesday, August 12, 2009 - 07:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

All vehicles bikes included are going to pop at deceleration, this is just unburned fuel going thru the exhaust; the louder the muffler is the louder your popping will be. Try the O2 sensor; I think you will find that is the problem.
There could be one other thing I would check; I have seen this on many cars. If you have a weak battery or the connections are loose, this could cause the ecm to lose the data it stores in the rom as it learns in open loop; that might be a long shot but I have seen many stranger things in my day turning wrenches.
The golden rule of any mechanic is to make sure you have a fully charged battery and that all the connections are clean and tight. If you have a voltmeter, check your voltage across the terminals while it’s running. Should be over 14 volts; correct me if I’m wrong on this guys, I don’t have time to look in the book.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Wednesday, August 12, 2009 - 09:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

it really may be as simple as a plug gap to far with the changes try changing plugs with a .037 gap it costs like $7.00 for 2 plugs
Top of pagePrevious messageNext messageBottom of page Link to this message

Krueger08xb12s
Posted on Wednesday, August 12, 2009 - 09:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks guys. I'll check the battery and change the plugs-although i made one attempt at changing the rear plug and after an hour gave up! I'm sure I'll find help in the badweb search. Thx again
Top of pagePrevious messageNext messageBottom of page Link to this message

Thatman
Posted on Thursday, August 13, 2009 - 01:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Invest in a good set of swivel sockets, it will save you time and aggravation…
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Thursday, August 13, 2009 - 09:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

a 4" xtension and a 5/8 swivel plug socket pull the air box covers you do not need to remove the lower plate either a pair of long handle needle nose will help with the plug wires but don't tear the wire
Top of pagePrevious messageNext messageBottom of page Link to this message

Brandon_m
Posted on Sunday, August 16, 2009 - 06:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Keep us posted as to what you find out. My '08 scg has the same problem. Took it to the dealer 6 times. The last time I took it to them they made me return the air cleaner and exhaust to stock before they'd diagnose it. AFV would be between 62 and 78 each time. Still doesn't run like it did last year and I'm so irritated with it, I parked in in the back of the garage and went back to the 12R. Not really sure what to do with it. This year th majority of the miles are back and forth to the dealer.
Top of pagePrevious messageNext messageBottom of page Link to this message

1313
Posted on Wednesday, August 26, 2009 - 09:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Keep us posted as to what you find out.

Does anybody have anything to update?

1313
Top of pagePrevious messageNext messageBottom of page Link to this message

Beliy
Posted on Wednesday, September 02, 2009 - 02:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i had the same issues


I just replaced the o2 sensor, engine temp sensor, and IAT sensor.. runs like a charm
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration