| Author | Message | ||
     Roc |
I'm going to replace my wheel bearings myself and I've found I can often buy a better bearing at a lower cost than from the HD shop. Anyone have a bearing manufacturer's part # for the right size bearing? | ||
| Dehorridge |
You need 6005 2RS fro the front and 6006 2RS for the rear. These are standard bearings. D | ||
| Roc |
Thank you very much D. | ||
| V2win |
Roc, Which bike are the bearings going into. If it is either the S1 or S2, I think the bearings are 60042rs and 60052rs. | ||
| Hardluckxb |
he's probably talking about the XB, but damn....thats an nice S1 in his profile!!! Roc, you should put a silver XB Lightning front on that thing! NIIICE BIKE...How does it run? | ||
| Dehorridge |
6005, 6006 are for the XB. D | ||
| Roc |
Thank you gents. Yes it is for the XB. The S1 runs very well. I guess I should change my profile picture ot avoid confusion. | ||
| Bigj |
When I had my Cyclone, I always got bearings from www.bossbearing.com  | ||
| Timbo |
I would like to keep these part #s for future reference, but I'm wondering if the #s are for a particular manufacturer? TIA Timbo | ||
| Dehorridge |
No. They are standard bearing numbers. Any manufacturer should do them. D | ||
| 1320 |
I might be mistaken but I believe the actual bearing numbers for the tube frame Buell wheels are 6204RS & 6205RS..the above post may have been a typo error?? | ||
| Kaese |
Roc: You are going to have to explain the color on your XB. How did you do it? | ||
| Roc |
It is a red kevlar and carbon fiber, black, weave. I started a company, contracted with a manufacturer, and recieved parts much later than I was told I would. It was pretty much down hill from there. On a positive note, I did not drop it last night when it jumped off of the front pit bull stand - saved by my lady and a fellow Buell rider. edited by roc on March 17, 2004 |
