G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through July 12, 2009 » XB Air Boxes « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Squirett
Posted on Tuesday, June 30, 2009 - 10:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

PLEASE can anyone or everyone out there willing and able please go to your xb and put your finger on your air scoop on the air box? I'm talking about the front corners of the air scoop on the air box cover. A month or so ago I noticed my air scoop wAs loose, it was missing a clip on the under side of the air box (the scoop, clip, and air box are all one part.) My air box cover was replaced by warranty. Now on my new air box cover the same thing has happened. I checked out a buddy's xb and noticed his air box has play at the same corner. this indicates that he has a clip missing too. My theory is that many people are missing clips on their air scoops but don't know it. like I said if anyone can push down on the scoop just to the left or right of the gas cap, see if it moves. My first one just moved up and down, and this one has even moved forward due to the place that the clip is missing. the air scoop is held on the box by these clips going around the outer edge of the scoop.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeffroj
Posted on Tuesday, June 30, 2009 - 11:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Are you talking about the mushroomed plastic holding the screen? Both my front and left have broke, looks like the other two are also soon to go from all the bouncing around. I tried to epoxy it, but couldn't do it without it being an eyesore through the clear plastic. I wasn't sure if this would be covered under warranty, this is good news.

Did the dealer give you any problems replacing the airbox cover for this reason?
Top of pagePrevious messageNext messageBottom of page Link to this message

Squirett
Posted on Thursday, July 02, 2009 - 07:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

THE DEALER GAVE ME NO PROBLEM THE FIRST TIME BUT NOW IF IT HAPPENS AGAIN THEY DON'T KNOW WHAT BUELL WILL SAY i KNOW THIS IS A BIGGER THING THAN US THREE i NEED MORE PEOPLE TO COME UP AND RESPOND!
Top of pagePrevious messageNext messageBottom of page Link to this message

Spacecapsule1
Posted on Thursday, July 02, 2009 - 07:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

just checked mine. it's loose at the two front corners. does that mean something is broken?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeffroj
Posted on Thursday, July 02, 2009 - 08:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Changed my air filter last night, that piece is barely hanging on.
Top of pagePrevious messageNext messageBottom of page Link to this message

Squirett
Posted on Friday, July 03, 2009 - 08:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Spacecapsule1 - Yes, and no, The air scoop is held on to the air box by little clips and there is no buell part number. The dealer will replace it under warranty. However It has happened to me twice. the dealer ordered the 2nd air box cover, but they have never had anyone come in with it before. I want to get a lot with the problem so we can go to buell and resolve the problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spacecapsule1
Posted on Friday, July 03, 2009 - 08:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i'll pull my cover later and check those clips. thanks for the info.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt32
Posted on Friday, July 03, 2009 - 09:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

All those "clips" are is basically molded/melted plastic. I bought my bike red and ended up trading a guy for his white. The white plastics were from an 03'. I had to cut those tabs so I could keep the air intake piece. With the air box cover being solid, I was able to use a thin bead of gorilla glue to hold the piece on.
Top of pagePrevious messageNext messageBottom of page Link to this message

2008xb12scg
Posted on Friday, July 03, 2009 - 04:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Just checked mine (08) and it's loose. I won't have time to take of the cover but will Sunday if time permits and I'll let you know. Thanks for the heads up.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sifo
Posted on Saturday, July 04, 2009 - 10:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

There was a picture of a bike that I saw a while back that had 5 stainless steel bolts holding the air screen in place. It looked pretty trick! It would be a cheap fix it you can't get it warrantied. I thought it was done just because it looked bad-ass.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeffroj
Posted on Sunday, July 05, 2009 - 02:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sifo, that's a darn good idea
Top of pagePrevious messageNext messageBottom of page Link to this message

2008xb12scg
Posted on Sunday, July 05, 2009 - 12:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I checked mine and it is loose. It has plastic melted? around the black part but nothing on the corners if that makes sense.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sifo
Posted on Sunday, July 05, 2009 - 07:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sifo, that's a darn good idea

All of my best ideas come from someone else.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jakecheez
Posted on Monday, July 06, 2009 - 02:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

my 03 has 2 stainless bolts holding the front down. i figured these bolts were stock, they're not?
Top of pagePrevious messageNext messageBottom of page Link to this message

Jakecheez
Posted on Monday, July 06, 2009 - 02:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

ignore me- im an idiot
think of it as a bump, sorry guys
Top of pagePrevious messageNext messageBottom of page Link to this message

Vasiliy_ru
Posted on Monday, July 06, 2009 - 03:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

to_Jakecheez: My bike has 2 stainless bolts with 2 plastic rims too. So I think you are not idiot or we are idiots together! : )
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration