G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Buford Posted on Saturday, June 27, 2009 - 07:32 pm:        Got one of these ramps for the 07 XB12. Their website doesnt have install instructions for Buells yet...was wondering what all is involved? thanks!   Ochoa0042 Posted on Saturday, June 27, 2009 - 07:56 pm:        swap it out.. simple.. and then adjust the clutch screw correctly** when reassembling **tighen the adjust screw till it lightly bottoms, then turn out 1/4-1/2 a turn. I usually give a 1/4 turn out, then a little bit more so that the lock nut seats in (Message edited by ochoa0042 on June 27, 2009)   Buford Posted on Sunday, June 28, 2009 - 02:22 pm:        Is it located behind the trans fill cover plate or?   Oxygen151 Posted on Sunday, June 28, 2009 - 03:37 pm:        Its located behind the larger of the two cover plates on the primary case. The one nearest the footpeg. Lightly bottoms is a very loose term, I have still yet to figure out exactly where the screw "loosely bottoms" at.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: