| Author | Message | ||
     Americanmadexb |
Does this look normal? i noticed im getting some wobble when i let go of the bars anywhere from 40 and up...  | ||
| Mtch |
thats your front engine isolator, nothing to do with the steering. check tire pressure, tire out of round, wheel balance warped disc, steerer bearings if you have done a lot of miles | ||
| Sifo |
I've had that exact problem from a worn front tire. | ||
| Americanmadexb |
damn, and i knew that... see it must be that damn Red Stag ive been drinkin since then.. i totally meant to say front isolator! anyways, i will check the rest, does the isolator look fine though? My front tire isn't worn.. but could be out of balance. I have had them for a 1 1/2 though and never really noticed it. | ||
| Johnnylunchbox |
The front isolator looks fine. No tearing right? The wobble could definitely be from a loose steering head bearing. If you have the service manual it's an easy adjustment. Check suspension setup too. | ||
| Spatten1 |
Yes, the isolator is supposed to look like it's not tightened up. That is normal. | ||
| Steve_mackay |
Check your steering head bearings for correct torque. Even my wife's STT with only about 3K on it, needed them re-torqued. My bike, even with the bearing torqued properly, still does it slightly with a bridgestone BT021 tire. | ||
| Americanmadexb |
no tears, im going to check the manual this weekend and re torque the steering head bearings. Thanks |
