Author |
Message |
Ripdog28
| Posted on Tuesday, June 02, 2009 - 03:22 pm: |
|
Just looked over my bike and noticed my clutch cable hitting my front header. It melted the plastic to the metal sheath. The little wire holder mounted to the front of the cylinder that holds the cable away from the header was broken. anyone had this? i dont see it being much of a problem due to the clutch cable being a metal wire and a metal cover. |
Biff
| Posted on Tuesday, June 02, 2009 - 03:28 pm: |
|
yep. common problem. scroll over to American Sport Bike and look at the updated part. it will correct this problem. |
Boney95
| Posted on Tuesday, June 02, 2009 - 03:29 pm: |
|
You have an 08, that clutch cable wireform is a recall. Bring it in and they'll replace a fix free of charge. |
Zatco81
| Posted on Wednesday, June 03, 2009 - 09:31 am: |
|
Has the retainer changed over the years because this is what's holding mine?
|
Cjnile
| Posted on Wednesday, June 03, 2009 - 09:05 pm: |
|
Zatco, look above the retaining ring in your pic and you will find what they are talking about. If you have a coathanger looking thing wrapped around your cable then it's the old version. The new version is tube-like and a much better design. |
Augustus74
| Posted on Wednesday, June 03, 2009 - 11:48 pm: |
|
On what year bikes is this a recall? |
Zatco81
| Posted on Thursday, June 04, 2009 - 08:52 am: |
|
What I show in the pics is the only thing holding it. I've seen the wire holder in pics but it's not on my bike. Wonder where these things came from??? |
Cjnile
| Posted on Thursday, June 04, 2009 - 01:11 pm: |
|
hmmm, I dunno. I'm probably not the guy to answer. I've only been a Buelly for a month and a half. My 07 Uly had the wire version so I bought the upgraded part from American Sportbike. |
Froggy
| Posted on Thursday, June 04, 2009 - 01:24 pm: |
|
quote:Has the retainer changed over the years because this is what's holding mine?
Yes, several times. I can tell your bike is an 03 based on your retainer. They switched it I believe for 04, and they changed it several times over the years to various thickness of what I called bent paper clips. Starting on March 2008 built bikes they switched to a totally new bracket that looks like a mini crowbar. The current part number is N0012.1AAA, and its $12ish. Here is a picture of the new retainer:
quote:On what year bikes is this a recall?
None. It is a service bulletin for some 2008 bikes. You should of gotten a letter in the mail from Buell if you qualify. I know dealers can look up your VIN and see if you need recalls, not sure about service bulletins.
|
Zatco81
| Posted on Thursday, June 04, 2009 - 01:38 pm: |
|
So the one that I have is fine? |
Aptbldr
| Posted on Thursday, June 04, 2009 - 01:41 pm: |
|
Does part bolt-on as an upgrade to earlier XB's (like an '04 XB-R)? |
Froggy
| Posted on Thursday, June 04, 2009 - 01:56 pm: |
|
quote:So the one that I have is fine?
I have never seen the one you got break. But its not as cool looking as the new one
quote:Does part bolt-on as an upgrade to earlier XB's (like an '04 XB-R)?
Yes |
Zatco81
| Posted on Thursday, June 04, 2009 - 02:06 pm: |
|
Get alot of compliments on your clutch cable retainer do ya? |
Froggy
| Posted on Thursday, June 04, 2009 - 06:26 pm: |
|
I still run the paperclip, I was waiting for my cable to snap so I would have an excuse to switch it. It snapped last night after a year of having the damn new retainer in my hands. Gonna swap them once I pick up a new cable. |