| Author | Message | ||
     Steve_mackay |
here's my wife's mount on "pinkie" http://farm3.static.flickr.com/2427/3579428233_cdc 9cdef94_b.jpg So some PVC "T", and threaded plug. A 1/4-20 x 2" screw, 4 rubber washers, a nylock nut, and a piece of old garden hose. And a sample video http://www.flickr.com/photos/stevemackay/358022119 2/in/set-72157618937662089/ I think it turned out better than expected. On Thursday, we'll be following Danny Eslick, Danny Bilansky and Michael Barnes on a ride from Hals to the HD Museum in Milwaukee, and I wanted to get that on video  | ||
| Ochoa0042 |
aim the camera farther down, looks good  | ||
| Court |
Down 5o Nice | ||
| Iamarchangel |
BTW, any other shots of pinkie, my daughter was asking? | ||
| Hogs |
They should be some good video shots Hope ya post em on here.... Yeah camera looks cool...You either got good Neighbors or they hope ya move LoL.... I wd. double think the one pole mount abit, Looks like if you are a one to Ride on the rear wheel at times. MAy be a factor of bending/breaking off??? Just a Birds eye view... Nice shots though | ||
| Fastxb12r |
You gotta love instructables.com I seen that a while back is that where you got the idea? http://www.instructables.com/id/How_to_make_a_DIY_ 5_camera_mount_for_motorcycle_h/ http://www.instructables.com/id/5-Motorcycle-Camer a-Mount/ | ||
| Steve_mackay |
More shots of pinkie....  I'm uploading video from both our bikes now. The wife still using the A900 fuji, and me using a Samsung MX10 Mpeg4 video camera, with stabalization. | ||
| Steve_mackay |
And my Neighbors... They don't care. They're used to me by now The video makes the bike sounds WAY louder than it is. It's bone stock. No, that's not where I got it. I got it here: http://www.knick-knack.com/howto/motorcycle/cheap- handlebar-camera-mount.html Here's a video on my "ulbolt" taken with a Samsun MX10 video camera. Here's the same thing, but on my wife's bike, using a Fuji A900 point and shoot camera. | ||
| Froggy |
Did you get a bulk purchase discount on XB12STT's or something? | ||
| Pkforbes87 |
That's the bike with dyed plastics right? I remember seeing it at Blackhawk Farms last year. Very cool ingenuity with the camera mounts, and with the dye! | ||
| Americanmadexb |
Yes its good to see Pinkie without the dirt stuck to it like last year at Homecoming!!!  | ||
| Xb12mel |
that's cool, you can sink up the videos... (ok, maybe more geeky then cool) Yeah, the fuji has got quite a bit of shake to it at about 3000 ~ 3500 RPM. Almost hard to watch. But it looks like the MX10 doesn't have that problem. Nice, thanks for the out of the box idea. | ||
| Steve_mackay |
I'll see if I can borrow another DV camera with stabilization for the ride to the Museum with Barnes, Bilasnky and Eslick, I may have to do a little video syncing Americanmadexb, Pinkie is actually a *NEW* Pinkie. Last year it was a CityX, this year, it's a STT. | ||
| Roysbuell |
What do you guys think of the Hero Pro Wide camera? Has anyone used one or seen a clip other then the one's on their website? | ||
| Steve_mackay |
These guys liked it... http://www.webbikeworld.com/r4/hero-camera/ | ||
| Froggy |
I have one on the way, more to come Currently have a Motocomm camera mounted to my front signal. | ||
| Roysbuell |
Good deal Froggy. Please post a few pics and a video clip even if its just going to the gas station or something. Just want an idea of what the pics and video quality are like. |
