Author |
Message |
Barker
| Posted on Monday, April 27, 2009 - 09:54 pm: |
|
I drained the crank case oil and primary oil a few weeks ago. Left plugs out. It has been sitting there. I was gong to fill her up in next few days. Should I be concerned? Just put the oil back in like normal? Any thing special? Sorry for the weird scenario/question. Peace & Grease, Barker |
Pepperk496
| Posted on Monday, April 27, 2009 - 10:10 pm: |
|
I had done the same thing a few years ago. The only issue I had was with the primary. I let the bike warm up for about 5 minutes before I took off, and I wasnt able to shift out of second for at least another 5 minutes. It was adjusted to spec just about as good as ever, I assume it just needed to slosh around inside for a few minutes until everything was properly lubed again. No worries. |
Barker
| Posted on Tuesday, April 28, 2009 - 08:24 pm: |
|
thats what I was think'n thanx |
Bishopjb1124
| Posted on Tuesday, April 28, 2009 - 08:37 pm: |
|
I had the oil out of the wifes bike all winter, just filled it up and started it no problems as of yet. Jimmy |
|