G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through April 27, 2009 » Break in miles? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Drafthoss40
Posted on Thursday, April 23, 2009 - 11:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I just bought my bike a 2009 XB12Scg black. once again thanks for the tips on the price I did not get the blue one, but I am riding one now. Paid 10617 out the door.

How do I break in the the bike and for how long? Thanks I have 40 miles on it now.

Thanks for all the input I can get,

Thanks Rich
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Thursday, April 23, 2009 - 11:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Wither you decide to follow it or not, the recommended directions are in your manual.
Top of pagePrevious messageNext messageBottom of page Link to this message

Badbuell08
Posted on Friday, April 24, 2009 - 12:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I was always told to break it in like you are going to ride it all the time



But that does not mean that it is right
Top of pagePrevious messageNext messageBottom of page Link to this message

Kootenay
Posted on Friday, April 24, 2009 - 01:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I ignored the manual and broke mine in by riding it hard (the motoman method)--that was 4 years and over 25K km ago, and it's run strong the whole time and doesn't burn a drop of oil. I can admit that I didn't follow the manual now it's off warranty...
Top of pagePrevious messageNext messageBottom of page Link to this message

Johnnylunchbox
Posted on Friday, April 24, 2009 - 01:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Don't beat the snot out of it, but don't baby it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Boney95
Posted on Friday, April 24, 2009 - 01:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Don't be bouncing off the rev limiter before the 500 mile mark, take her easy. But ride it like you would normally, ranging your rpms.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jraice
Posted on Friday, April 24, 2009 - 02:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

+1 to everyone. I am not a believer of lugging around for 1000 miles like the manf says but I also dont go out and do a methodical break in like motoman.

I road my bike for 50 miles with very low rev's, usually around 3,500rpm tops. That was mostly because it was a brand new bike to me with brand new tires and I was riding home 40 miles in the rain : p.

Then I started just riding it like I would normally, moderate acceleration, rev's to 4,000-4,500. As I got a couple hundred miles on it I would do some harder WOT accelerations to 5,000rpm and then after I got over 600 or so I just started beating on it. I think they say 90 percent of the break in is on the first 50 or so miles and the rest is mostly in the first 1000 miles.

From around 700 to now (almost 1100 miles, getting ready for the 1000 mile service and synthetic oil) I have been riding it fairly hard in the mountains, almost always over 4,000rpm and to redline a handful of times.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hammer71
Posted on Friday, April 24, 2009 - 07:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My 05 I got from Danbury had about 200 feet of recommended break in (parking lot). I beat that thing like a red headed stepchild for 17 thousand miles and it never had an issue. It only took a Blue Toyota and a nice highside at 80+ mph to bring it down, although it still ran perfect after that. Change fluids at recommended interval but for all else I wouldnt worry about it. Ride the balls off it and enjoy it
Top of pagePrevious messageNext messageBottom of page Link to this message

Kbaddict
Posted on Friday, April 24, 2009 - 07:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Break it in like your gonna ride it. Just make sure you always give it a couple minutes to warm-up.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Friday, April 24, 2009 - 08:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Warm it up properly before a ride.

Ride back roads, where you're naturally on/off throttle and up/down thru the gears. Just don't get on the highway and ride for hours and hours at one speed. If you have to slab it, use the squirt/coast method, and go up and down from 4th to 5th and back when you can.

First 50 miles be gentle. 50-500 ride like a normal, sane person - don't use the rev limiter as a shift indicator. 500, break-in is done; first service scheduled at 1000.
Top of pagePrevious messageNext messageBottom of page Link to this message

Drafthoss40
Posted on Friday, April 24, 2009 - 11:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks put 210 miles on it today on back roads.

Thank for your input...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration