Author |
Message |
03firebolt
| Posted on Wednesday, April 01, 2009 - 01:08 pm: |
|
Whenever I hook my bike up to ecmspy, for some wierd reason, it's having trouble connecting, all I get is a "failed to get com port" message. Then if I go to troublecodes, it says "failed to get firmware version... Exiting now!" so does anyone know what I'm doing wrong? |
Point_doc
| Posted on Wednesday, April 01, 2009 - 02:14 pm: |
|
Did you download the FTDI Driver? Page FIVE of the tuning guide. |
Garyz28
| Posted on Thursday, April 02, 2009 - 12:17 am: |
|
Is your Kill switch in the Run position? |
03firebolt
| Posted on Thursday, April 02, 2009 - 12:26 am: |
|
ok, it probably would have helped if i would have read that in the instructions. Thanks i got it working now |
Randomchaos
| Posted on Thursday, April 02, 2009 - 12:09 pm: |
|
Rather then start yet another new ECMSpy thread, figured I would tack this question onto this one. I'm looking at making a cable, but see that there are 2 different USB cables available. One appears to be a 3v and the other is a 5v. Which one should I get to make the cable? Both are priced the same. http://www.mouser.com/Search/ProductDetail.aspx?qs =sGAEpiMZZMt4a%252bVKO2jOrSfKSC7EUJZq55DSCZphhfk%3 d http://www.mouser.com/Search/ProductDetail.aspx?qs =sGAEpiMZZMt4a%252bVKO2jOrfSrr7sUIV2jkj0OYybDD%2fA %3d |
Xoptimizedrsx
| Posted on Friday, April 03, 2009 - 01:18 am: |
|
5v a fdti cable there is two other places making the cable but you want a fdti cable. there's is the only one that works 100% i have a driver that works link that works 100% get this driver the exe file. the link is in the comments. a setup executable file. run from the site there is no need in saving it. http://www.ftdichip.com/Drivers/VCP.htm} mike (Message edited by xoptimizedrsx on April 03, 2009) |
|