Author |
Message |
Xbmacon
| Posted on Wednesday, April 01, 2009 - 08:36 am: |
|
I bought some "new" pucks from a fellow badwebber. My question is, the pucks came with slits in the adhesive backing, like a cross. Is this how they are supposed to be? I wouldnt think so, but I have been known to be wrong. I just want to know so he and I can discuss it before I do anything with them. They came and it was "just the pucks". I am going to do the alcohol thing (me and the bike, she cant drink alone.) |
Hammer71
| Posted on Wednesday, April 01, 2009 - 08:41 am: |
|
Mine had same slits in them. Brand new out of the box. Them and a small alcohol pad in the box |
Fastxb12r
| Posted on Wednesday, April 01, 2009 - 08:47 am: |
|
Yeah mine where the same also. |
Xbmacon
| Posted on Wednesday, April 01, 2009 - 08:52 am: |
|
thanks guys, that's what I had hoped. I guess its a couple of drinks for me and some alcohol the Buell and then it's puckin' time! (Message edited by xbmacon on April 01, 2009) |
Etennuly
| Posted on Wednesday, April 01, 2009 - 06:11 pm: |
|
One shot deal on the pucks! Ya can't pull them back to realign them. I found it best to line them up before pulling the backer, make a locater mark(I used masking tape and penciled on that). They stick real good! |
Fastxb12r
| Posted on Thursday, April 02, 2009 - 12:33 am: |
|
if you mess up you can remove and retape them.Ive done it on mine just use the good tape not walmart trash. |
|