G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through March 03, 2009 » New clubmans.. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Thursday, February 19, 2009 - 01:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

after seeing how the xb looks w/ the clubmans....i knew i had to have them....and i just got them yesterday..

BUT

i started installing them, and now im wondering how the heck am i gonna reroute the wires and stuff...especially the brake line...cant get that friggin bolt to come out so i can reroute it...

any ideas on how to reroute them so they wont have problems later on?

btw here are some pics of the beginning proccess (sorry for the phone cam pics, it was all that i had.




Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Thursday, February 19, 2009 - 03:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Welcome to the Clubman's Club, Ozzie.

Now experience the heartbreak and frustration of getting it all to work.



Not as easy as it looks.

I solved the brake line problem by going to a remote sports bike master cylinder and reservoir, by Shindy. I think I may have gotten it from Dennis Kirk.

The other hard one is the clutch lever. With the bars mounted low as you have them, you might think about drilling a hole in the side of the windscreen mount as Glitch has done. I mount my bars higher, so I was able to bend the clutch cable to suit. Very tight fit, but it works fine.

Here's what it looks like on my bike.


ddd

ddd


By the way, the CRG brake lever had to be modified to fit the master cylinder modification, so to speak.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kaveman
Posted on Thursday, February 19, 2009 - 03:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Nice bars, but bummer on the install pains! what is the comfort level leaning in like that?
What year FireChicken? I'd say 73... Is it a 455 version? Had one in a younger life!
Top of pagePrevious messageNext messageBottom of page Link to this message

Ducbsa
Posted on Thursday, February 19, 2009 - 03:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

See http://www.badweatherbikers.com/buell/messages/327 77/434100.html?1235000777

I converted to XB12R throttle and clutch cables and brake hose.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Thursday, February 19, 2009 - 03:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the front of my bike is currently apart so i'll throw a few pics up later of the cable routing behind the flyscreen. clubmans on these bikes look sinister and they feel amazing ounce you get a few miles on them.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Thursday, February 19, 2009 - 04:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

kaveman- 71 formula 400
its just to expensive to finish...been at it for a couple of years

ducbsa- ill check it out right now

ustorque- i would be GREATLY appreciative
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Thursday, February 19, 2009 - 04:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

"Not as easy as it looks. "

you aint kiddin!
Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Thursday, February 19, 2009 - 04:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

do i see the home made double top clam riser in those pics? great work so far! don't get frustrated, i'll snap those shots for ya and get you back together in no time.....give me about an hour.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Thursday, February 19, 2009 - 05:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

o.k. so here we go, i'll try to make it simple, i took a lot of pics for ya.

pull the clutch cable out of the tripple tree and route it thru the back of the fairing housing.see pic






pull the cable up thru and work it thru the mess of harness and wires in there.i drilled out the left side of the fairing mount to run the cable out to the lever.see pic





attach back to lever and check for binding.see pic





throttle side is pretty much the same steps. see pics below, just make sure once again for binding.








i was able to leave the brake line outside it just has a very loose "S" bend to it that has no effect on it.






and just a plug for our sponsor Precision Engineering they make a damn nice 2 1/2" machined bar riser that works great for this mod for under $30, and Andy is a great guy to deal with.




Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Thursday, February 19, 2009 - 06:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

wow that riser looks awesome!
thanks for the pics...ima see if i can pull it off tonight....
wish me luck
Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Thursday, February 19, 2009 - 06:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

good luck....any problems, let us know.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Friday, February 20, 2009 - 01:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i cant get that friggin bolt out...the one that holds brake cable in the back of the flyscreen....its really irritating me
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Friday, February 20, 2009 - 08:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

if you end up pulling off the front modules to gain access to that bolt, replace the 'security bolts' with some regular allen heads. i doubt any bike thief is gonna see those and not reach for the nearest set of vice grips.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Saturday, February 21, 2009 - 12:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i couldnt get the security bolts, but i did get the bolt that i needed...
got the brake lever on, and made the hole for the clutch, but now it seems like the cable is way too short to put on the lever,,,,did i do something funky (wrong)



and this is how i routed it,,,,seems like it doesnt bind, but still

Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Saturday, February 21, 2009 - 07:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

have you loosened up the clutch cable adjuster assembly to give some slack in the cable?
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Saturday, February 21, 2009 - 07:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the S clutch cable is too long. double check, but the R cable should fix that issue.
it looks like (from the pictures) you may have drilled the hole for the clutch cable too low.... i did the same thing. just tell them it's a 'lightening hole'
not everyone knows the front modules are made of aluminum
Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Saturday, February 21, 2009 - 07:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

'lightening hole'

if thats the case i've shed a lot of weight!
Top of pagePrevious messageNext messageBottom of page Link to this message

Ducbsa
Posted on Saturday, February 21, 2009 - 08:55 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

See this for clutch cable routing. The module has been moved out 1", so you may have different results. I used an R cable and my clipons are lower than yours. I put a thin rod in the perch and saw where it would contact the module, then moved the hole centerline back to allow for the curve of the cable. Also, the spacers give it room. Teddagreek's routing with an S cable may be what you need.



Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Monday, February 23, 2009 - 09:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

well im pretty much done...just need to bolt it all on to the triple tree, but it seems like the bolts dont wanna go in anymore...not even the original ones...i wonder why

rerouting the right side was a punk


oh and kaveman...heres are a couple of better pics of my formula


Top of pagePrevious messageNext messageBottom of page Link to this message

Bwesky
Posted on Monday, February 23, 2009 - 03:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

question... i had bought a set of clubmans for my 03 9s... anywyas i had a second stock bar clamp and made risers with steelrisers so to speak...

in this pic, i put the risers on the top just to show that the bars would fit without risers... i soon got shorter bolts and ran no risers.




now my dilema was the brake line... my brake line was NOT rerouted, and i had no idea where to put it. the brakes felt as if the line had a kink in it... which it probably did. I was not sure what to do at this point.

after riding for a whiile with the bars i began to love them. The reason i put this is past tense is because i blew a fork seal by putting too much weight on the front tire. The forks on my bike are hacked up from the previous owner, and i was informed that there are deep scrathces in the fork tube that cause the fork seals to rip.

I would really like to put my clubmans back on, but i need a front brake! i think i will be set on the seals as i have gotten them both changed. if anyone has any ideas as to how i should reroute the brake line please let me know...


here is another picture, as you can see, i have my clutch cable rerouted through the housing, throttle cables were moved slightly, but the brake line stayed the same. you can see a bend in it which i think caused the lack of pressure.




i would like any help because i wunna get this babies back on the buell before riding season!
Top of pagePrevious messageNext messageBottom of page Link to this message

Ducbsa
Posted on Monday, February 23, 2009 - 06:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Use an XB12R hose and route it like an R. The bend in the pic won't decrease pressure at all, unless it got kinked.

Who made your bars, they look great! Would have been less work than my clipons.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bwesky
Posted on Monday, February 23, 2009 - 10:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

my bars were bought at a local bike shop got them for 25$... i am not sure of the brank but thanks! : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Monday, February 23, 2009 - 10:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i ordered a set online 2 day. look very similar

http://www.motorcycle-superstore.com/1/4/68/4917/I TEM/Bikemaster-Clubman-Handlebar.aspx
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Wednesday, February 25, 2009 - 01:14 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i bought them for 28 bucks (bikemaster) at a local bike too

and guess what...i just finished riding the bike....wow its a huge difference in riding position....ima have to get re-use to my own bike...

here are some pics of the finished product...thanks for everybody that helped me out w/ this mod



Top of pagePrevious messageNext messageBottom of page Link to this message

Ustorque
Posted on Wednesday, February 25, 2009 - 06:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

nicely done, the clubmans put you into a very aggressive yet very comfy riding position....have fun!
Top of pagePrevious messageNext messageBottom of page Link to this message

Brazenbuck
Posted on Thursday, February 26, 2009 - 09:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Not trying to hijack the thread, but hat Formula is BEAUTIFUL! One day...
Top of pagePrevious messageNext messageBottom of page Link to this message

2008xb12scg
Posted on Thursday, February 26, 2009 - 09:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

It sure is! I had a '74 (not nearly as nice) Sometimes I wish I woulda kept it instead of the kids..Just playing...maybe...
Top of pagePrevious messageNext messageBottom of page Link to this message

Bwesky
Posted on Thursday, February 26, 2009 - 09:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

One question, how much pressure do you guys think the steel spacers can take? i like to ride on one wheel occasionaly and i dont wunna snap my bars off lol
Top of pagePrevious messageNext messageBottom of page Link to this message

Duff24
Posted on Thursday, February 26, 2009 - 09:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Buells don't wheelie!?
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Friday, February 27, 2009 - 08:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

well, they are steel, not chincy aluminum like the frame ......

i'd be more concerned 'bout the bar welds, but not concerned 'nuff to keep it at half throttle. i'm sure if someone had snapped a set, it'd be all over here
Top of pagePrevious messageNext messageBottom of page Link to this message

Kaveman
Posted on Friday, February 27, 2009 - 09:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Oz,
Like the bars! Looks like a good amount of work to get them to work.
The Car is SWEEEET!!! I really miss the one I had. 72 Formula 400 4 speed(also had a 73 350 auto version). To get it now would cost a few more $$$ than back then.
Have FUN!!!
Kaveman
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Friday, February 27, 2009 - 04:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

thanks for the props...i actually took it all day yesterday...and it felt like a COMPLETELY different bike!
feels good, especially in the turns.,,,

and its the 1st time i ride the bike in the mid 80 weather and guess what.....i discovered that my bike gets friggin hot...especially on the right side, i wonder what the heck im gonna do when it gets to the 100s like it does here in texas
Top of pagePrevious messageNext messageBottom of page Link to this message

Brazenbuck
Posted on Friday, February 27, 2009 - 05:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If it were me I'd take the Formula : ), but if you insist on riding in 100 degrees it shouldn't be that bad. I've been on mine in 110 in the CA desert. Just keep moving and don't lug the engine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ozzie84
Posted on Saturday, February 28, 2009 - 08:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the bird doesnt have a/c though
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration