G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through March 28, 2009 » My winter project(s) » Archive through December 14, 2008 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Tuesday, December 02, 2008 - 07:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've begun undertaking a few ambitious projects recently and thought I'd share them.

It started when the price of gas $ky rocketed this summer, and I figured I could have some fun while saving $. That's where things began to go sideways...So on August 1st I bought an '03 Buell Lightning, and took it's picture the very next day.
8/2/08



It came into my possession needing some maintenance (front tire, damaged front wheel, dented frame, and 10k service) and I figured I'd just fix that stuff. It didn't take long before I was wrist deep into it searching for the cause of a misfire. Which turned out to be a worn through front spark plug wire (common apparently) requiring the replacement of the wire, 2 nut-serts (?), and the 2 bolts I had to grind/drill to get out. Then came the front tires replacement. With some delicate tapping I was able to do a decent job of straightening the wheel lip and it balanced w/o any weights.

I didn't need much seat time before realizing that a couple things could be improved upon. First were the mirrors, the one remaining shook like a queer in a bologna factory, and bar-end's look sooo much better. A quick look on http://www.badweatherbikers.com and http://www.buellxb.com sold me on purchasing moto-delux mirrors off fleabay.


I had planned to fill/repair the frame dent when the season up here came to an end. Now that I've had the bike for a couple months I have a few other ideas for winter projects, and hope I can get most of them done before spring.

So off w/ the bits in my way.
11/23/08




11/30/08


I have just a bit more to do to get that frame off. You can expect some pics w/o forks and less one tail section soon. (stupid snow is slowing me down)

Top of pagePrevious messageNext messageBottom of page Link to this message

Skinstains
Posted on Tuesday, December 02, 2008 - 05:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Where is the dent in the frame ?
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Tuesday, December 02, 2008 - 08:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

"Where is the dent in the frame?"-Skinstains

Under the left puck. PO filled it w/ some sort of epoxy and painted that side gloss gray. He also over-sprayed onto the intake scoop so the black scoops (right, left, and oil cooler) will probably be be painted metallic black.

I'm not looking forward to pulling floss through the adhesive tape behind the pucks.

Any ideas where I can get new sticky stuff to re-adhere them?
Top of pagePrevious messageNext messageBottom of page Link to this message

Skinstains
Posted on Tuesday, December 02, 2008 - 08:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Buying new pucks would probably be best. Or find out where Buell gets the adhesive.
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Wednesday, December 03, 2008 - 07:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

As I stated earlier the snow is slowing my progress a bit. But I did find enough time to prep/paint some of the smaller parts that have been removed.

12/3/08


Rustoleum Silver Metallic if you're interested...: p
Top of pagePrevious messageNext messageBottom of page Link to this message

Bwesky
Posted on Wednesday, December 03, 2008 - 08:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

hmm tht looks kinda sexy! i got my 03 back in february, dirty as balls, ended up having to get new headers, repair brakes, redo all wiring on the wiring on the bike, new clutch and thats not even the half of it, loooking good so far, keep us updated! i love 03's the best : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellinachinashop
Posted on Thursday, December 04, 2008 - 12:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I like that stand, what kind is it? Did it come as a set with the front axle stands?
Top of pagePrevious messageNext messageBottom of page Link to this message

Damnut
Posted on Thursday, December 04, 2008 - 01:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I can't believe you asked that second question.
Top of pagePrevious messageNext messageBottom of page Link to this message

Buelltroll
Posted on Thursday, December 04, 2008 - 01:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


GOOGLE
jack stands
yes they usually come in sets....
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Thursday, December 04, 2008 - 06:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I got the cycle/ATV jack and the SUV Jack-stands at SEARS.

The jack is a Craftsman Professional aluminum, and stands weren't sold w/ it as a set...

(Message edited by h2owerker on December 04, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellinachinashop
Posted on Thursday, December 04, 2008 - 12:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I hate you boobs.
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Thursday, December 04, 2008 - 04:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I like bewbs!
Top of pagePrevious messageNext messageBottom of page Link to this message

Skinstains
Posted on Thursday, December 04, 2008 - 07:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Tough room.
Top of pagePrevious messageNext messageBottom of page Link to this message

Wolfridgerider
Posted on Thursday, December 04, 2008 - 10:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

First were the mirrors, the one remaining shook like a queer in a bologna factory

Thats just wrong.... Damnut can't help himself....

atm boy!
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Thursday, December 04, 2008 - 10:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

17* here today, but I did get to spend a little time in the garage. So the forks came out, the rear suspension has been disconnected, and I'm ready to pull the frame off. If only I had some ratchet straps...

12/4/08


And here's how I keep warm in the garage.


I can't remember the brand name right now, I'll try to get tomorrow. I can tell you that it'sa 30-50,000BTU propane torpedo heater, and I use a 20lb tank to fuel it.

Top of pagePrevious messageNext messageBottom of page Link to this message

Lovecars
Posted on Thursday, December 04, 2008 - 11:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

"Where is the dent in the frame?"-Skinstains

Under the left puck. PO filled it w/ some sort of epoxy and painted that side gloss gray. He also over-sprayed onto the intake scoop so the black scoops (right, left, and oil cooler) will probably be be painted metallic black.

I'm not looking forward to pulling floss through the adhesive tape behind the pucks.

Any ideas where I can get new sticky stuff to re-adhere them?



Go to an auto body shop supply store and buy 3M trim body side tape either the green or black. Be aware that it might be cheaper to buy new puck on EBay.}
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Friday, December 05, 2008 - 06:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks! I'll call around to see what the 3M trim tape sells for.
Top of pagePrevious messageNext messageBottom of page Link to this message

Lovecars
Posted on Friday, December 05, 2008 - 11:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Winter???? i don't get it...

It's 76 out here in So.Cal although at night it's getting REAL COLD around 50.... brrrrrrrrrrr

I hope the garage warms up fast tomorrow, I'm doing the 1000 mile service....
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Saturday, December 06, 2008 - 05:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If the winter here was like that I'd never get started on these projects.

14 degrees last night. I didn't go out to do any work on the cycle, and when I get home from work today I'll have to shovel the snow that's falling...
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Saturday, December 06, 2008 - 09:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've completed the disassembly and have a few pics to share from tonight.

12/6/08








That's all for tonight. I'll post pics of the frame and other parts as I paint them.

I'm going to have to do a little frame work on the garage to make reassembly easier...
Live and learn right?
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Saturday, December 06, 2008 - 10:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

your an inspiring... now if i only had a garage
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Tuesday, December 09, 2008 - 12:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I set about doing a few small things tonight, which consisted of removing a few small sub assemblies so I can paint them. (Rustoleum again) Easy enough.

Then I decided that since I know of one nasty dent in the left side. I'll pull the pucks, and see just how bad it is.

Off w/ the puck...



Just what I expected to see. It will never be "As good as new" but I'll fill it, paint over it, and get new pucks.

Then I remove the Right side puck...WTF! the PO never said anything about a dent here! MOFO Cork Soaker! I couldn't stop myself from cleaning the adhesive backing off (most of the scratches are from me) so I could get a good look...



FACK!
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Tuesday, December 09, 2008 - 11:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I got a few more parts painted. I'm going Metallic Black for some contrast.



On another note. I'll be ordering a 04+ belt conversion kit, and belt guards from www.americansportbike.com to make this b!tch a little more reliable.
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Saturday, December 13, 2008 - 03:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'm almost done painting the little parts, and will be moving on to the frame soon. I'm hoping that I'll be able to get started filling the dents this week and have it painted by the end of next week.

Here's the air scoops, I thought that since the intake is composed of 2 pieces that I'd go w/ a silver tip and inside.



If it doesn't look right I'll just have to remove it and respray.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tq_freak
Posted on Saturday, December 13, 2008 - 08:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That scoop is going to look awesome!! nice detail
Top of pagePrevious messageNext messageBottom of page Link to this message

Ochoa0042
Posted on Saturday, December 13, 2008 - 08:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

are you replacing the frame? or fixing it?
kudos on going this far, I wouldnt have the gonads to take it apart like that!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

2008xb12scg
Posted on Saturday, December 13, 2008 - 09:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I wouldnt have the gonads to take it apart like that Nor would I...
I like the silver and black.
Top of pagePrevious messageNext messageBottom of page Link to this message

Oxygen151
Posted on Saturday, December 13, 2008 - 11:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ya big ups to you for taking initiative to do this project. I like what you are doing, but here is my question. Will the spray paint hold up in time?
Top of pagePrevious messageNext messageBottom of page Link to this message

H2owerker
Posted on Sunday, December 14, 2008 - 12:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

"That scoop is going to look awesome!! nice detail"Tq_freak

Thanks! If it doesn't work out the way I want I may respray it black, or accent it w/ the color of the bike.(TBA)

" Will the spray paint hold up in time?"-Oxegen151

Who cares. It's my first cycle, and I got it relatively cheap...Everything except the frame can be easily (sort of) removed and resprayed at the end of a season, and the only difference between "REAL paint" and spray paint is the applicator. Prep/technique/environment are where durability are built. I don't know if having a "flex" additive would help, but I did use a Plastic primer where appropriate.


"are you replacing the frame? or fixing it? Kudos on going this far, I wouldnt have the gonads to take it apart like that!!! "-Ochoa0042
While I wish I could have found a better specimen. there's no need to replace the frame, I'm not building a track or show bike. I'm doing this solely for myself and my personal spin on the XB style.

The line between cojones and stupidity can be hard to distinguish most of the time...

(Message edited by h2owerker on December 14, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Oxygen151
Posted on Sunday, December 14, 2008 - 02:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I wasn't saying anything bad about it. I was just curious. I would love to spray paint some of my parts. I commend you for doing such brave things to your bike, theres no doubt in my mind that it wont look great. Great work!
« Previous Next »

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration