G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mathen001 Posted on Tuesday, September 23, 2008 - 02:58 pm:        I bought a ceramic header, in installing it I left the sensor out to ease putting the back pipe in. Now is there some trick to getting that sensor in? should I remove the fan, the spring, the entire engine? I need help!   Redbuelljunkie Posted on Tuesday, September 23, 2008 - 04:42 pm:        Officially, you have to rotate the engine down. Hopefully, you can find a way around that. Good luck.   Bishopjb1124 Posted on Tuesday, September 23, 2008 - 08:29 pm:        You do not have to rotate the engine down, I have done the headers on 2 xb9s and also 2 xb12s and have not rotated the engine on any of these bikes, if anyone wants the info PM me and I will send you the instructions.   The_new_guy Posted on Wednesday, September 24, 2008 - 06:51 am:        That would be good to have in the KV section(or here or somewhere on Bad web).

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: