G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bagoxcalum99 Posted on Wednesday, August 13, 2008 - 09:36 pm:        Hey guys, I just chopped my cheesegrater and got everything hooked back up and it was working great! Then I went back out a little later, and my tail light, brake light, turn signals and dash lights and guages quit working. They only dash light that works is the high beam indicator. I checked all the fuses and wiring and I'm stumped. Any ideas? Thanks guys, Matt   Xb9er Posted on Wednesday, August 13, 2008 - 09:37 pm:        double check your accessory fuse   Bagoxcalum99 Posted on Wednesday, August 13, 2008 - 10:25 pm:        Checked the accesory fuse and lo and behold, it was blown. The right side rear turn signal wires were pinched so I made the appropriate tweaks and it solved that little problem. Thanks again! Matt   Xb9er Posted on Wednesday, August 13, 2008 - 10:39 pm:        Been there done that. I've gone through a few accessory fuses. Do what I do and buy a 10 pack of 10w fuses and keep them under your seat with your registration and insurance cards.   Kmfw160 Posted on Thursday, August 14, 2008 - 09:16 am:        lol. me too...got a pack in the tool bag.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: