Author |
Message |
Bagoxcalum99
| Posted on Tuesday, August 12, 2008 - 07:19 pm: |
|
Hey guys, Well, I chopped my cheesegrater and it looks great, but in my haste, I forgot to label the wiring for the taillamp and the rear turn signals. Anyone have a diagram or something that I can print and use to reconnect everything? Any help is appreciated. Thanks! Matt |
Buelltastic
| Posted on Wednesday, August 13, 2008 - 03:12 am: |
|
Hey Matt ~ I don't have a diagram, but if you have a continuity tester that may do the trick. |
Bagoxcalum99
| Posted on Wednesday, August 13, 2008 - 07:03 am: |
|
Nope,don't have one of those either. |
Chippy
| Posted on Wednesday, August 13, 2008 - 09:45 am: |
|
the blinkers both have blue and black wires coming out of them which plug into the two pairs of brown and black. you'll have to check to make sure the correct sides are plugged in together. the license plate light is orange w/ a white stripe (as is the brake running light) but the license plate wire has a "bullet" connector on it. there is a black ground wire for the brake light assembly, and the red w/ yellow stripe is the brake light itself. all brake light connections are square automotive type conns. |
Bagoxcalum99
| Posted on Wednesday, August 13, 2008 - 08:50 pm: |
|
Sweet, got it all hooked up and operational! Thanks for the help guys! Matt |
|