| Author | Message | ||
     Nickr8523 |
I recently purchased a 2004 Buell Firebolt XB12R, it stopped running recently so i tested the stator which was putting out the correct voltage, i then tested the voltage regulator, which was bad, i replaced the voltage regulator and the bike ran great for about 3 hours then when i stopped it the bike wouldn't start again when i turned the key the gauge wouldn't even turn on, i then replaced the battery now the gauge came on, but when i flip the engine kill switch to run the bike does not make that whining noise they usually do, and when i press the start switch nothing happens, absolutely nothing, no noise or anything, help me, what could it be and how much will the parts cost. | ||
| Damnut |
Check the relays on the left side of the instrument cluster, also check the fuses on the right side. | ||
| Brumbear |
You blew a fuse but why? fist make sure you have a good ground and then check fuses find the one blown and trace it to the problem |
