G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dynamicpress Posted on Tuesday, August 05, 2008 - 06:52 am:        Can you reprogram the stock ECM with the Data from the Race ECM or is there something else that comes into play   Hammer71 Posted on Tuesday, August 05, 2008 - 07:13 am:        Yes you can, I havent figured out how to do it but I was told on another board that it can and is done on a regular basis.   Mr2shim Posted on Tuesday, August 05, 2008 - 08:50 am:        http://xoptiinside.com/downloads Bottom of page. Yes you can. It's fairly simple once you get the cable and the driver installed for EcmSpy.   Ratyson Posted on Tuesday, August 05, 2008 - 09:09 am:        WARNING: PRIOR to uploading the race ecm maps, make sure you download and save your stock maps in a VERY safe place... Burn them to a CD. That way if something happens, you have a base to fall back on. Also, you will probably need to do a TPS reset after uploading the race ecm maps as well. Have fun! Happy Tuning!}}   Teeps Posted on Tuesday, August 05, 2008 - 09:12 am:        I tried doing just that and the bike would start, but did not run well and the fan ran all the time with the key on, with cold engine. Then I learned the memory allocation (so to speak) are in different places on the race ECM vs a stock XB ECM. The fuel and ignition "maps" can be uploaded to the stock ECM; but it's not the same as the race ECM. Due to internal differences.   Xbswede Posted on Tuesday, August 05, 2008 - 09:18 am:        As Teeps says memory allocations are different. If you want the Race data on a Stock ECM you have to manually update the cells so that the data is n the correct cell. You can not just do a generic over write.   Ratyson Posted on Tuesday, August 05, 2008 - 09:21 am:        Thanks for the info Teeps and Xbswede, that is good to know. I haven't had time to play around with mine yet... Plus, I really want to learn more about the tuning science before I even download an already tuned map.   Id073897 Posted on Tuesday, August 05, 2008 - 10:02 am:        The memory layout is identical when using the same ecm type, but varies in size and layout between the various ecm types. It's not possible to exchange memory contents between different ecmtypes. Regards, Gunter   07xb12ss Posted on Tuesday, August 05, 2008 - 10:05 am:        Can you reflash a race ecm or is it better to just buy a stock one to reflash and sell the race one?   Nik Posted on Tuesday, August 05, 2008 - 10:34 am:        I burned the race ecm map (not eeprom!) to my stock ecm with ecmspy and it works just fine. No copying and pasting or anything like that.   Deanbush Posted on Sunday, August 10, 2008 - 10:48 am:        Nik, has your mpg changed alot since you installed the race fuel maps? Thanks, Dean   Nik Posted on Sunday, August 10, 2008 - 03:47 pm:        I've only gone through two tanks, but it seems about the same.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: