Author |
Message |
Moosestang
| Posted on Sunday, August 03, 2008 - 08:54 pm: |
|
Does anyone know what instructions I need for the dobeck tfi? They have a ton listed on their website for download. I have a slight stumble at cruise around 3k rpms and want to see if I can tune it out. First i'll change the plugs though. Here's were it was set when I bought the bike. the last one is set at 7. The bike has a drummer, open airbox, might have race filter, but not a K&N, race ecm.
|
Moosestang
| Posted on Sunday, August 03, 2008 - 09:13 pm: |
|
I think I found it on their site under harley instructions, understanding the pots. |
Typeone
| Posted on Monday, August 04, 2008 - 08:08 am: |
|
here's the final settings I ran when the TFi was installed... K&N stock inner airbox no snorkel Race ECM Drummer pipe TFi settings = 4 – 7:30 – 6 – 8:15 EDIT: this was for an earlier generation TFi, around '05-'06, i believe they changed a bit but if yours is from that gen you could give the settings a try (Message edited by typeone on August 04, 2008) |
Kds1
| Posted on Monday, August 04, 2008 - 10:29 am: |
|
the stumble is from too much fuel....turn the second pot counterclockwise to the 1oclock pos and the 3rd also, leave the 1st alone and put the 4th on 8oclock....this is for an xb9 only... Kevin www.kdfab.com |
Typeone
| Posted on Monday, August 04, 2008 - 10:43 am: |
|
ah, sorry Moose, i was thinking you had a 12. listen to Kevin, he knows whats up |
Moosestang
| Posted on Monday, August 04, 2008 - 05:31 pm: |
|
Well the 3rd is already at 1, but i'll try the second at 1 and i'd already planned to set the fourth to 8 after doing some research at dobeck forums. |
|