Author |
Message |
Schmitty
| Posted on Monday, June 23, 2008 - 06:16 am: |
|
I changed the primary oil on my race bike yesterday and when I pulled the drain plug the oil that came out was a milky gray color! WTF! I have changed it several times and it has never come out looking like that. What the hell happened? I was running Amsoil MCV 20W-50 if that matters. Schmitty |
Boney95
| Posted on Monday, June 23, 2008 - 06:45 am: |
|
Sounds like water in your primary. |
Wolfridgerider
| Posted on Monday, June 23, 2008 - 08:20 am: |
|
I had the same thing happen on the Uly. I needed to adjust the clutch and when I went to loosen the cable a bunch of water ran out of the boot. NASTY water! The inside of the inspection cover looked like chip dip. I cut the bottom off the boot so water wont be able to collect there. I also put a zip tie at the top of the boot with some grease for a added bonus. LUBE the cable! |
Bumblebee
| Posted on Monday, June 23, 2008 - 03:50 pm: |
|
Yes,as Boney95 said; water has contaminated the oil. Now why is a good question. |
Firebolt32
| Posted on Monday, June 23, 2008 - 04:00 pm: |
|
The inside of the inspection cover looked like chip dip. Ummmm....chip dip. |
|