G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through June 19, 2008 » Mid trip troubles in Newfoundland « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Carbide
Posted on Tuesday, June 10, 2008 - 06:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well, I have made it as far as Cape Breton, Nova Scotia, from Toronto and discovered a bit of a problem. It seems that cruising at 80mph for several hours will cause oil to leak from your starter all over the left side of the rear tire. Anyone else experience this? More importantly, is there anyone out this way who can provide any assistance? All I really need is to find parts and service in Newfoundland or Nova Scotia. Any help would be greatly appreciated.
Top of pagePrevious messageNext messageBottom of page Link to this message

Beachbuell
Posted on Tuesday, June 10, 2008 - 06:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

There is no oil in your starter to leak out. Are you sure that your breather tube isn't puking?
Top of pagePrevious messageNext messageBottom of page Link to this message

Whitexc
Posted on Tuesday, June 10, 2008 - 06:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is the breather breathing??? Crankcase pressure? Good luck and I hope you get it fixed to have a great trip.
Top of pagePrevious messageNext messageBottom of page Link to this message

Guell
Posted on Tuesday, June 10, 2008 - 06:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the seal might have gone out, not sure how the xb is set up, but the tuber bikes have the gasket there beachbuell.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaimec
Posted on Tuesday, June 10, 2008 - 07:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

There is NOTHING in Newfoundland. You're best off where you are. If I recall correctly, there was an independent cycle shop specializing in Harley Davidson somewhere near the city of Sydney...
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogs
Posted on Tuesday, June 10, 2008 - 07:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

In Halifax area,
Not sure How I can help though?
Top of pagePrevious messageNext messageBottom of page Link to this message

Smoke
Posted on Tuesday, June 10, 2008 - 08:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

is the starter loose at all? no movement when the starter button is pushed? route your tranny vent into an aspirin or water bottle and if it starts filling with oil your engine main seal is leaking. i have drained my primary before on a long trip in order to prevent unscheduled maintenance on the road. keep an eye on engine oil level. if the starter is loosening, open primary and tighten. car parts parking lot, buy tools and repair.
good luck,
tim
Top of pagePrevious messageNext messageBottom of page Link to this message

Caperken
Posted on Tuesday, June 10, 2008 - 10:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I live in Cape Breton but I'm traveling now and won't be home for more than a week. There is a Harley dealer in Sydney that does not sell Buell, but might be helpful. The closest Buell dealer is in Halifax, Privateer's Harley/Buell. There is a very good independent motorcycle mechanic in Middle River in the Margaree Valley, near Baddeck. The name is Gasit and the phone is 295-3221. Jim and Derek work on just about any motorcycle and should be able to help.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaimec
Posted on Wednesday, June 11, 2008 - 08:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ah! I wasn't aware that was an official Harley dealership. I've seen the signs many times but never actually found the place.

Hey, while you're up that way, stop here for the fried chicken (it's quite good):



Yes, they sell T-Shirts!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Jaimec
Posted on Thursday, June 12, 2008 - 08:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey Carbide! Haven't heard an update from you... how's it going up there??
Top of pagePrevious messageNext messageBottom of page Link to this message

Carbide
Posted on Friday, June 13, 2008 - 11:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well, it's been quite an adventure.
I contacted Bill (Newfie_Buell) through the BRAN which is a great resource. He has offered his tools, garage and to help with the repairs. He is a great guy and I can't thank him enough. He also has gone to great lengths to source parts which are not available in ALL of Canada. Got to love the lack of dealer support.
I'm heading over to his place in St. John's on Sunday with the bike on my dad's truck. Hopefully everything gets fixed and I can ride home with confidence.
This whole experience has confirmed to me that Buell riders (and people from the East coast) really look after each other. Thanks to all you guys for your offers to help and suggestions.
I plan to include my contact info in the BRAN as well to help any riders in need when in the Toronto area. Anyone who does a lot of touring should consider doing the same.
Check out my other post for trip details.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spatten1
Posted on Friday, June 13, 2008 - 11:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

FYI:

When I rebuilt my engine, I did not have a new starter/primary case gasket. The old one was torn.

I just re-used the old gasket with blue RTV and it has worked fine for over a year.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration