| Author | Message | ||
     Adrien |
Hello All...! Curious to know if anyone knows where to purchase a pair of risers for Tomaselli Condor adjustable handlebars...? Thanks! Adrien | ||
| Mmcn49 |
Don't know if this will work for you but I put a pair or 2" ROX pivoting risers on my TT's stock bars, (had to re-route the brake line). When I put the solo seat back on, I started experiencing wrist pain. To beat that I also added a pair of Pacific Engineering 1” risers. With both risers installed the throttle cables had to re-routed in back of the two piece windscreen module. The module is bolted to the triple clamp with two allan bolts and two tamperproof torx bolts, (you can purchase a cheap set of tamperproof torx bits at most auto parts stores). The clutch cable is just long enough, and all the handlebar wiring cables are again, just long enough, though I did have to snip most of the cable ties. Both sets of risers are made to be used on Buell’s. |
