G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Flatliner_dnr Posted on Sunday, April 13, 2008 - 02:15 am:        Anybody here using an LC-1 wide band O2 controller? Was wondering how you might have it set up, if you need to adjust the analog 1 output voltage, or if running it out of the box is adequate.   Id073897 Posted on Sunday, April 13, 2008 - 05:10 am:        http://www.ukbeg.com/modules.php?name=Forums&file= viewtopic&p=383203#383203 ECM setup, unless not mentioned there otherwise: O2richVoltage: 521 mV (= 0x6B) O2leanVoltage: 448 mV (= 0x5C) O2rpmActive: 12,750 rpm (= 0xFF) Regards, Gunter   Hogs Posted on Sunday, April 13, 2008 - 06:38 am:        There also was someone using the Lm 1 here on the forum, However I forget just who it is, Maybe a search might bring it up for ya...   Marc340 Posted on Tuesday, April 15, 2008 - 09:50 pm:        i was using the lm 1 to tune whit the direct link

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: