| Author | Message | ||
     Mookie |
can someone please explain to me how the headlight bulbs are removed? I have the cap and the pins that hold it in out, but I cant get the bulb to release/. | ||
| Chainsaw |
pull the rubber boot back from the headlight assembly, unplug the WHITE wire coming from the bulb. There is a wire retaining bracket, hinged on one side (narrow) and 2 tab latches on the other. Push the tabs toward the front of the bike and in towards each other. The bulb has a white wire leading to a small round base. At this point you can pull the base and bulb out. If it's stuck at this point, I would assume a small amount of corrosion. Try a pair of needle nose pliers to get a good grip on the base where the WHITE wire attatches. Hope this helps! | ||
| Mookie |
yeah that was it. I allready got it before i read this post. I just didnt want to torque on the harness too much. allthough i believe one wire is white and one is yellow. |
