G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ferocity02 Posted on Saturday, April 05, 2008 - 10:45 pm:        I installed my Jardine pipe yesterday on my XB12Scg. It went pretty smoothly but I have a question. In the directions it said to put a spacer between the motor and the s-bend bracket for the XB12 but not for XB9. To me, the s-bend seemed to bolt up just fine with or without the spacer. I was curious to how you guys did it. Thanks!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: