G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through February 25, 2008 » Removing upper belt cover « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bcool83
Posted on Friday, February 22, 2008 - 12:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So I tried removing the upper belt cover tonight...only to get confuzzled at how to remove the front-most bolt - the one right behind the brake lines. I've removed the heel guard, and found the right hex head to go in the bolt, but I can't get the right angle on the long hex drive I have to turn the bolt... Other suggestions?
Top of pagePrevious messageNext messageBottom of page Link to this message

Sub65chris
Posted on Friday, February 22, 2008 - 11:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

SV1000S- i dont know about that bike but on my xb i uses a short bit and a 1/4 inch wrench to remove the top belt cover. you are talking about the belt cover that attaches to the swingarm right?
Top of pagePrevious messageNext messageBottom of page Link to this message

1324
Posted on Friday, February 22, 2008 - 12:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I think he's referring to the XB he just bought. If so, you can use a ball end allen key if you have one. If not, just remove the 'rearset' panel. It's only a few bolts and then you can swing everything out of the way for access.
Top of pagePrevious messageNext messageBottom of page Link to this message

Darthane
Posted on Friday, February 22, 2008 - 01:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If not, just remove the 'rearset' panel. It's only a few bolts and then you can swing everything out of the way for access.
~~~>1324

What he said. Don't remove the heel guard - remove the entire peg mount ass'y. It's 3 allen-head bolts and you can just move it over or ziptie it up out of the way until you're done.
Top of pagePrevious messageNext messageBottom of page Link to this message

New12r
Posted on Friday, February 22, 2008 - 02:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You will have to pull the wheel off to get the gaurds off. IIRC That is the 03 belt system and it is a PITA to pull the wheel with the gaurds in place. I can stop by and show ya how if needed.

PM me your number and when you will be around and I will see if I sneak out!
Top of pagePrevious messageNext messageBottom of page Link to this message

Bcool83
Posted on Friday, February 22, 2008 - 06:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yes, I'm talking about my 03 XB9S, sorry...

I don't have, nor do I know what is, a ball end allen key... But I'll try taking off the whole rearset - I'm sure that will work, I just never tried it.

I hope I don't have to take the wheel off Charles! If I do, I'm def waiting till you can come over, I'm too ascared I posted my number up for ya on BSB - I'll be around here for another hour or two, then both nights this weekend.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bcool83
Posted on Friday, February 22, 2008 - 07:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Welp, New12r is right - the 03 is retarded. I've gotta pull the wheel to do it right, if I want to salvage the guard... So New, you have a swingarm stand and axle wrench?!
Top of pagePrevious messageNext messageBottom of page Link to this message

Pwnzor
Posted on Saturday, February 23, 2008 - 09:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Here's the difference between ball-end and standard allen wrenches or "keys"


It lets you approach the bolt from an angle.

(Message edited by pwnzor on February 23, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Bcool83
Posted on Saturday, February 23, 2008 - 10:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So you'd put the ball end into the bolt head?
Top of pagePrevious messageNext messageBottom of page Link to this message

Pwnzor
Posted on Sunday, February 24, 2008 - 02:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

right, it works kind of like a universal joint
Top of pagePrevious messageNext messageBottom of page Link to this message

Bcool83
Posted on Friday, March 07, 2008 - 11:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

FYI - on an 03, you do not have to remove the rear wheel, providing you don't mind not having the belt cover backing piece in multiple pieces. I wanted to keep the lower belt cover on, so this wasn't a problem for me.

You just have to remove the swingarm brace! The upper belt cover will come off with that (providing you've removed the screws holding the upper belt cover to the cover backing plate). Then cut the backing plate as you see fit, remove the cover from the brace, and reinstall the brace, torquing the bolts to 50 ft lbs. Voila...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration