G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through February 04, 2008 » Gap for spark plugs '06 firebolt « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Darth_buell
Posted on Sunday, January 27, 2008 - 01:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Can't seem to find the gap for my plugs on an '06 firebolt. Can some help
Top of pagePrevious messageNext messageBottom of page Link to this message

Pwnzor
Posted on Sunday, January 27, 2008 - 01:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Can't imagine they'd be different from an '05, and the gap is 0.035 in (0.9mm).

Cable resistance is 1350-3465 Ohms.

Torque to 11-18 ft-lbs (15-24Nm)
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbswede
Posted on Sunday, January 27, 2008 - 10:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

+1

(I even opened the manual)
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Sunday, January 27, 2008 - 04:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I gapped mine at .038 and did away with most of the pinging in hot weather. But it does gurggle a little in the exhaust.
Top of pagePrevious messageNext messageBottom of page Link to this message

Slaughter
Posted on Sunday, January 27, 2008 - 04:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Can't seem to find the gap for my plugs on an '06 firebolt. Can some help

0.035... definitely.

I found your gap right here:




(JUST KIDDING!!!!) ; )

(Message edited by slaughter on January 27, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Pwnzor
Posted on Sunday, January 27, 2008 - 07:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Sunday, January 27, 2008 - 08:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

FWIW, my 12 likes .030" best with NGK 9 series iridiums.
Top of pagePrevious messageNext messageBottom of page Link to this message

Darth_buell
Posted on Monday, January 28, 2008 - 09:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Typeone, What do you mean your 12 "likes" .030... More performance?. I'm i Tucson, AZ so no pinging in hot temps sounds good. but .008 is a big difference.
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Monday, January 28, 2008 - 10:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Darth, I don't have hard dyno evidence but when I changed my plugs late summer the gap was at .025" by mistake (pre-set NGK Ir) and the front wheel was lofting off the ground while shifting high up in the rev range. felt fantastic. nothing else changed on the bike. i was boggled. BUT... popping on decel increased a ton. i was totally confused but knew i only messed with the plugs.

yanked 'em back out and set the gap to spec at .035", lost that little of that snap of power i was so happy with and i experienced a little bit of ping. hmmm. so i figured why not try out .030" and see how things worked out. some of the power was back (we're not talking mountains here but def noticeable), the ping gone and popping back to normal on decel. my last ride of the season the bike ran fantastic with this gap.

now, it could have been the cooler weather setting in, the fuel, or something else (was tweaking fuel maps during this time but not during these tests) but all i know is the bike was 'happy' at .030" vs. .035" by the book.

again, no hard evidence but SOTP feel.
Top of pagePrevious messageNext messageBottom of page Link to this message

Raymondt
Posted on Wednesday, January 30, 2008 - 08:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Guys
I went away from the ngks due to their poor and in consistent performance. A combination of the BUELL Pro series plugs and a set of racing wires from Iron Machine. You will be happy I promise.
Top of pagePrevious messageNext messageBottom of page Link to this message

Typeone
Posted on Wednesday, January 30, 2008 - 08:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

poor and inconsistent performance? never in all my years of motorcycling, dirt and street, have i had an issue with an NGK plug. i use them in everything. the Buell Pro Series i tried and ditched but i know many like them.

i also have the IronMachine race wires but i dont like the cap, it pushes on the inside of the frame. we all know what eventually happens on these bikes when something is rubbing or touching something else it shouldnt.

just a couple a coins on both comments. only based on past experience. YMMV.
Top of pagePrevious messageNext messageBottom of page Link to this message

P47b
Posted on Tuesday, February 19, 2008 - 08:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Just wondering what gas companies you all are buying gas from.
The gas you buy from company to company varies a whole lot.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration