G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Njsxb9 Posted on Sunday, November 04, 2007 - 09:41 am:        does anyone know what size pin is need for the headlift stand on a Buell lightning or firebolt?   Hexangler Posted on Sunday, November 04, 2007 - 11:17 am:        I don't have a head lift stand, but I went out and measured the hole at the bottom of the steering head shaft 2007 XB12R. It measured 0.745-0.749" with my dial caliper. That is real close to 3/4 inch diameter, and could be accounted for by small error in my measurement. I have a lathe if you need help. I have read that PitBull stand company will send you correct size post upon request. Hex   Rocketsprink Posted on Sunday, November 04, 2007 - 11:42 am:        I believe it a #7 if you're talking a Pitbull stand.   Tailspining Posted on Sunday, November 04, 2007 - 11:45 am:        I have an XB9R 2005 and just got the front Pit Bull stand from Al at American Sport Bike. It's a number 2.   Njsxb9 Posted on Sunday, November 04, 2007 - 01:31 pm:        Ahh I found a chart on Woodcraft's website. The pin is an 18mm for the lightnings and firebolts.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: