| Author | Message | ||
     Ustorque |
i think i may pull my logos off today any tips? i think its been said before hair dryer? thanks | ||
| Ccryder |
Hair dryer helps plus dental floss. See-saw it to cut through the adhesive bonding line if you can. Then some goo-b-gone and you're done. Neil S. | ||
| Chihuahua_stud |
Is there a way to get the x off the cityX air box cover? | ||
| Ustorque |
i think its pretty much the same way hair dryer and elbow grease. | ||
| Damnut |
I found it was easier to do it cold. It came off cleaner. I removed mine in the winter and heated up the first couple and they left a gummy residue. The rest I just lifted an end and pulled like hell. No gummy residue. | ||
| Tq_freak |
If you get the X off in one piece Ill buy it from you. | ||
| Jimduncan69 |
mine came off really easy. it was a hot day and they just peeled right off. left no residue. | ||
| Brad1445 |
car wash and a bunch of quarters | ||
| Chihuahua_stud |
Tq_Freak I will let you know how it works out. | ||
| Tq_freak |
Chihuahua_stud thank you To add some value to this thread, I de-badged and the airbox cover I have on now and I didn't heat them up at all, I just used an old credit card to get under the edge and then gently pulled and worked them up. Then any residue I had I used goof off to take it off. then I did Novis 1 and 2 and it looks great. I didn't screw the emblem up that much so I stuck them on the back of my Jeep.  | ||
| Chihuahua_stud |
Tq that didn't work out so well. I couldn't get the glue off, so I had to put it back on. Guess I will be looking for a new air box cover. When i buy one I will let you know and get the X to you then. | ||
| Ustorque |
thanks for all the help guys logos came right off....i opted for hairdryer and credit card and went very smooth. thanks again |
