| Author | Message | ||
     Mjhzn6 |
I saw a Ss in the classifieds with a Ulysses seat and subframe on it. Does anyone know if that will fit on a S as well? I dont know if the main frames are the same on these bikes or not. Sure would be nice for a cross country tour. If not, has anyone with an S had any exprience with a more comfortable seat for long rides. Im looking for suggestions. Thanks in advance. | ||
| Swordsman |
Can't say for certain, but i think the answer in "no". The Ss and Uly frames are supposed to be wider than the S. ~SM | ||
| Tq_freak |
I agree and I don't think it can be done with out some adapters. I have seen an S tail on an SS but a lot of work had to be done to the tail section to get it to fit to the frame right. Never say never, I have an R triple tree and bars on my S after being told but a bunch of people that it would never work. | ||
| Mjhzn6 |
I figured there is enough difference to make it not work. But like you say, never say never. Anything is possible, right?? I imagine that you are right. If the subframe is wider I should be able to fab up some spacers. Ill do some more research. Keep bringing on the advise though. Thanks again | ||
| Glitch |
It'll fit, without too much fuss. A friend of mine just put an R tail on his Ss. The Ss frame is almost the same, just a bit wider. | ||
| Xl1200r |
Can't be done? It's only metal...you can do anything. | ||
| Spiderman |
a welder is to metal as a eraser is to paper  | ||
| Jaimec |
If at first it doesn't fit, get a bigger hammer. |
