| Author | Message | ||
     Southsidebuellone |
What is the BEST flowing aftermarket Buell (XB ONLY) exhaust in the whole wide world? (I'm looking for your expert opinions here.) 1. 2. 3. (Message edited by southsidebuellone on August 27, 2007) | ||
| Wantxbr |
Depends on what your looking for from your pipe. All out horsepower, maybe torque. You want the pipe to give you power in the low to mid range or mid to high range? Have you checked American Sport Bike out on their Exhaust Shootout yet? http://www.americansportbike.com/ Good Info there. But if it's just flow your truly looking for than I would say Micron. But wouldn't be the pipe I pick for my bike. (Message edited by Wantxbr on August 27, 2007) | ||
| Nickcaro |
+1 on recommending you look at the shoot out reports. me, I'm very happy with the Original Drummer | ||
| Xl1200r |
It's an impossible question, as Want pointed out. It all just depends on what you want. Try telling us where you want to make your power, then we can help. | ||
| Slaughter |
If legality and availability is no issue - the Beson. Hasn't been made for about 3 years now. Can't run it on the streetbike without having somebody weld in an Oxygen sensor port or getting a module that will operate in open loop. It truly is the loudest pipe you will ever hear on the XB. Force megaphone included. It has tons of testing done on it. You asked... but yeah, you need to narrow your selection criteria. | ||
| Hogs |
I would have to say the Force is still alot Louder than the Beson.... Maybe on WOT they are close..but up to that point the Force Barks out Loud... Btw I do have both and have ran both on the street,and yes I had to weld in a 02 sensor bung... | ||
| Bigdaddy |
If it's a serious question then you should go read the exhaust shootout. | ||
| Isham |
Why don't you guys just ignore. |
