G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Swordsman Posted on Friday, July 06, 2007 - 03:31 pm:        I could have sworn that American Sportbike used to carry a set of adapters that lowered the stock S footpeg an inch (closer to Ss height), but I can't find them anymore. I have an Ss, but I just got the Crossroads treeclimber-esque spikey pegs from Al, and the profile is much higher than stock. I'm feeling a bit "bunched up" now, and thought maybe I could use those adapters to bring them back down a bit. Thanks to anyone that has information! ~SM   Samiam Posted on Friday, July 06, 2007 - 05:44 pm:        The "lowering" footpegs usually refer to lowering the R footpegs an inch. This is done by direct swapping in S footpegs since they're lower by 1 inch anyway. No adapter needed, just a direct swap to the stock S footpegs. Sorry man, you may be stuck. Sam

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: